Tsubaki Products

Plastic modular chain 　WT2525-M type

Lineup of 100mm width closed type for WT2520 series mold-to-width type
100 mm chain width makes them ideal for replacing from belt conveyors.
Because the chain surface has a gentle convex shape, the stacked heavy sheets slightly fit into the convex shaped surface to prevent slipping.

Features

・100 mm chain width makes them ideal for replacing from belt conveyors.
・Surface shapes for ease of handling

Because the chain surface has a gentle convex shape, the stacked heavy sheets slightly fit into the convex shaped surface to prevent slipping.

[Image of outfeeding conveyance ]
・Reduce transfer space

By installing a Φ50 round bar at conveyor ends, transfer space between conveyors can be reduced.

In this case, it is a forward/reverse bottom drive^?.

Note) Install a safety device (safety cover, etc.) to prevent entanglement at in-line area.

[In-line layout ]

×

(Drag to move. )

What is a forward/reverse bottom drive?

Forward/reverse refers to forward rotation (forward) and reverse rotation (backward) of the motor. By doing so, the conveyed object can be moved forward and backward.

Bottom drive means that the position of driving unit (drive sprocket/motor) is below/bottom the conveying surface.

The above two are collectively called forward/reverse bottom drive.
・Can be configured in combination with closed type

WT2525VG-M type (rubber type) and WT2525-M type (closed type) can be configured in combination.

Note) Please contact us if you would like a configured in combination.

[Configured in combination ]
・Maintenance times can be reduced

The pin and plug retention system makes chain disconnecting work easy and allows partial repair.

The following are the industries we recommend.

May not be used depending on conveying capacity (conveyor speed), material to be conveyed (weight, shape), environment and application.

Use as a guide when selecting.

Recommended industry /Conveyed material size (●：Recommended ○：Can be used △：Varies depending on conveying conditions. )

Conveying size (Weight )	Industry
Conveying size (Weight )	Can manufacturing	Beverages	Tire	Mechanical parts	Logistics	Pharmaceuticals	Bakery/Food	Secondary battery	Semiconductor ・ Solar panel related
High	△	○	△	○	○	△	△	○	△
Medium	△	○	△	○	○	△	○	○	△
Low	△	●	△	●	●	△	●	●	△

Application

※Click "model" for more information

・Both stable conveyance and cost-effectiveness WT2520 Series
・By installing a round bar at conveyor ends, transfer space between conveyors can be reduced.
・Suitable to convey stacked cardboard sheets, suitcases, machined parts and building material.

・Both stable conveyance and cost-effectiveness Line-up of rubber types for WT2520 series
・Rubber is mounted on conveying surface, makes it ideal for inclined conveying at a maximum angle of 20° for boxes and other objects.

・Lineup of 100mm width rubber type for WT2520 series mold-to-width type
・100 mm chain width makes them ideal for replacing from belt conveyors.
・Enables inclined conveyance with less slipping off thanks to rubber molded by double injection molding (integral molding of different materials) on conveyance surface of chain.