Tsubaki Products

Flow Conveyor Chain for Grains

These chains are specially designed for grain conveying horizontal flow conveyors (incline/decline gradient less than 10°).
Sweeping board prevents material on a rail from being crushed, while a cleaner prevents grain from remaining in a case.
Cleaner attachment spacing is every 6m.
Attachments are normally spaced every two links (on inner link).
Note) Sweeping boards are not attached for forward and reverse operation.

*Please also consider "Screw Lock Link," a connecting link that makes cutting and connecting easy.

Catalogs ・Instruction Manuals

・Flow Conveyor Chain conveys powders in a sealed case, which prevents dispersal, making it optimal for conveying loose materials safely.
・Attachments use carbon steel standard, with stainless steel also available.
Let Tsubaki recommend ideal base chain series to match properties of your conveyed items. Contact a Tsubaki representative for further information.
・Types of attachments are as shown in the figure below. For details, please check details page from a product list.

・Carbon steel attachments are standard, but stainless steel attachments can be manufactured upon request.
・Base chain is either standard DT series conveyor chain or reinforced AT Series, but users can select other specifications to match a nature of a conveyed material.

・Metric pitches

・Imperial pitches