Lambda Plastic Roller Conveyor Chain
- Can be used without lubrication and suppresses a generation of metal wear debris.
- Conveyor chain that can be used lube-free even when lubrication is difficult.
- Can maintain a clean environment.
- Roller is made of engineering plastic, and bush is special oil-impregnated bushes. (Other parts are made of steel. )
- Operating temperature range :0℃~50℃
Construction
Features
・Lube-free, long life :
Wear life between pin-bush and bush-roller is greater than that of DT Series while being lube-free.
・Low Noise :
5-7db quieter than steel rollers. No grating sound when rollers rotate.
・Low running resistance :
55% lower than steel rollers. (Unlubricated )
・Clean :
Suppresses generation of metal wear dust.
・Lightweight :
30% lighter than steel rollers.
・Interchangeable :
Dimensionally compatible with conveyor chains. Users can switch to Lambda Plastic Roller Conveyor Chain with no additional changes. (It is necessary to check strength and other factors. )
Catalogs ・Instruction Manuals
List of Models
※Click to see detailed information.
※Maximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain.
This value will differ by manufacturer and is not a guaranteed value.
※Contact a Tsubaki representative regarding average tensile strength.
Size | Roller type |
Pitch | Roller diameter |
Inner width of inner link |
|||
---|---|---|---|---|---|---|---|
75mm | 100mm | 125mm | 150mm | Φmm | mm | ||
RF03 | RP | RF03075RP-LMC | RF03100RP-LMC | --- | --- | 31.8 | 16.1 |
FP | RF03075FP-LMC | RF03100FP-LMC | --- | --- | |||
RF05 | RP | --- | RF05100RP-LMC | RF05125RP-LMC | RF05150RP-LMC | 40 | 22 |
FP | --- | RF05100FP-LMC | RF05125FP-LMC | RF05150FP-LMC |