Plastic top chain TPF type
- Chain pitch
38.1mm - Straight running
- Same plate thickness of 3.2 mm as stainless steel top chain (TT type).
- With a larger allowable load (about 1.4 times) than TTP type, and ideal for conditions where more load is applied.
Features
- ・With a larger allowable load (about 1.4 times) than TTP type, and ideal for conditions where more load is applied.
- ・Adopts same plate thickness of 3.2 mm as stainless steel top chain (TT type).
■Application
The following are the industries we recommend.
May not be used depending on conveying capacity (conveyor speed), material to be conveyed (weight, shape), environment and application.
Use as a guide when selecting.
Contact us if there are any applications or conditions not described.
Recommended industry /Conveyed material size (●：Recommended ○：Can be used △：Varies depending on conveying conditions. )
| Conveying size (Weight ) |
Industry | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Can manufacturing | Beverages | Tire | Mechanical parts | Logistics | Pharmaceuticals | Bakery/Food | Secondary battery | Semiconductor ・ Solar panel related |
|
| High | ○ | ○ | △ | ○ | ○ | △ | △ | △ | △ |
| Medium | ● | ● | △ | ● | ● | ● | ● | ● | ● |
| Low | ● | ● | △ | ● | ● | ● | ● | ● | ● |
Application
- ■Conveying containers for food, cans, beverages, etc.
List of Models
※Click "model" for more information
| Chain pitch mm | 38.1 |
|---|---|
| Application | Straight running |
| Pin type | Stainless steel pin type |
| Pin material | SUS304 |
| Pin shape | D-shaped pin |
| Top plate thickness mm | 3.2 |
| Model | TPF |
|
|
| Top plate width mm | 76.2, 82.6 |
Notes
1.Knurled type joint pin was changed to D-pin in January 2009.
2.Knurled pin type and D-pin type cannot be connected. When replacing, be sure to replace the chain as one unit.
3.Plastic pin type is not available.
