Power-Lock SL Series
- External locking type to tightened from the outside of the hub.
- ・Especially suitable for hollow shaft connections such as reducers.
- ・It can be used where design limitations force the use of thin-walled hubs.
- ※There is no hub movement when assembling.
- ※When used for a hollow shaft, the inner diameter of the hollow shaft must be considered at the time of selection. Please contact Tsubaki representatives for details.
Standard package
- ・Coated with a special lubricant eliminating the necessity to apply oil and grease .
- ・The larger the shaft diameter, the greater the torque can be transmitted.
- ・Simple structure for easy mounting and removal.
- Applicable shaft diameter ：Φ24～Φ300
- Torque range ：167～290000N・m
- Applicable tolerance ：Hub outer diameter ：h7 Hub hole ：H7 (Applicable shaft tolerance ：h6)
- Applicable surface roughness ：Ra1.6
Construction
Double taper
・In the Power Lock SL series, the inner diameter of the taper rings A and B and the outer diameter of the inner ring are tapered. By tightening the locking bolt, the taper rings A and B slide on the tapered surface.
Catalogs ・Instruction Manuals
Model No. examples
| PL | 024 | X | 050 | SL |
| ｜ Shaft diameter |
｜ Outer Diameter |
｜ Series |
List of Models
※Click the name for more information.
| Standard package |
|---|
| PL024X050SL |
| PL030X060SL |
| PL036X072SL |
| PL044X080SL |
| PL050X090SL |
| PL055X100SL |
| PL062X110SL |
| PL068X115SL |
| PL075X138SL |
| PL080X145SL |
| PL090X155SL |
| PL100X170SL |
| PL110X185SL |
| Standard package |
|---|
| PL125X215SL |
| PL140X230SL |
| PL155X265SL |
| PL165X290SL |
| PL175X300SL |
| PL185X330SL |
| PL195X350SL |
| PL200X350SL |
| PL220X370SL |
| PL240X405SL |
| PL260X430SL |
| PL280X460SL |
| PL300X485SL |
