Helical gear head GMTK

Product photo
  • General-purpose gear heads for servo applications achieving high economic efficiency and short lead-time.
  • The Helical Gear Head GMTK-L is parallel-axis, high-efficiency.
  • Compatible with foot mounting, flange mounting and face mounting.
  • Output shaft ： Solid
  • Compatible servo motor ： 0.2～2.0kW　Reduction ratio ： 1/5～1/200

Features

  • ・Economical

    General-purpose gear heads are designed for servo motors, allowing us to quickly deliver economical products.

  • ・High Efficiency

    A high-efficiency helical gear is used to maximize the servomotor performance.

  • ・Low Noise & Long Life

    The reducer unit provides low-noise operation and long service life that were achieved through our years of experience manufacturing gear motors.

  • ・Free mounting direction

    There are no limitation on the installation angle, such as horizontal, vertical, and tilt.

  • ・Output shaft backlash (These are approximate values. )

    Units: arcmin
    Reduction ratio 5～10 15～100 120～200
    Angle 70 40 30

    ※These values are not guaranteed.

Mounting Type and Output Shaft Rotation Direction

L U F
Illustrated Illustrated Illustrated
[Output Shaft Rotation Direction ]
2-Stage Type ： Same Direction as Input
3-Stage Type ： Opposite Direction to Input
[Output Shaft Rotation Direction ]
2-Stage Type ： Same Direction as Input
3-Stage Type ： Opposite Direction to Input

Catalogs ・Instruction Manuals

Model No. examples


GMTK 0738 U 30 - □□□C
｜
Type 		｜
Size 		｜
Mounting type 		｜
Reduction ratio 		｜
Mount code
L：Foot mount
U：Face Mount Type
F：Flange mounting 		(Clamp type )

■ Tsubaki model No. navigation

Selected model No. ：

Display product details

＊Select each item in order from the left to make sure a valid model number is generated.

Type name Size Frame number Mounting type Reduction ratio Shaft Arrangement Mount code

18

24

28


5～25

30～75

100～200






Please refer to the motor mount dimension drawings below,
and select the specific mount code.

Type name

HMTK：Right-angle shaft using a hypoid gear.

GMTK：Parallel shaft using a helical gear.

Size

This indicates the rated input capacity.

Frame number

This indicates the size of the gear reducer. For most models, this is the same value as the output shaft diameter.

This is automatically determined by the motor capacity and reduction ratio.

Mounting type

L：This type is for foot mounting.

U：This type is for face mounting.

F：This type is for flange mounting.

　　Whether the model comes with a face mount or flange mount will automatically depend on the frame number.

Reduction ratio

This indicates the reduction ratio.

The range is separated into sections that correspond to the frame number.

Shaft Arrangement

For the HMTK Type

　No symbol: leave the shaft arrangement symbol blank if you specify hollow type (H) for the mounting code.

　S：On this type, the mounting code is for face mount (U), and the solid output shaft protrudes on the mounting surface side.

　T：The solid output shaft protrudes on both sides.

For the GMTK Type

　No symbol: Leave the shaft arrangement code blank.

Mount code

Specify the mount code that corresponds to the motor to be mounted.

List of Models

※Click the model No. for detailed information. Expand all Collapse all

Rated Input 　0.2kW　（Model No. GMTK02～）

Rated Input 　0.4kW　（Model No. GMTK04～）

Rated Input 　0.75kW （Model No. GMTK07～）

Rated Input 　1.5kW　（Model No. GMTK15～）

Rated Input 　2.2kW　（Model No. GMTK22～）

Motor Mounting Dimension Drawings

Units ：mm

Size Mount code
Table of Compatible Motors
by Manufacturers 		Motor Mounting Dimensions
AD MA MB MC MD ML(min) MS MT
GMTK02 E4DC 65 □60 Φ50G7 M5Depth 12(PCD70) 5 30(25) Φ8 M4
E4EC Φ9
E4HC Φ14
G2HC □80 Φ70G7 M6Depth 10(PCD90)
GMTK04 E4HC 54 □60 Φ50G7 M5Depth 12(PCD70) 5 30(25) Φ14 M4
G2HC □80 Φ70G7 M6Depth 10(PCD90)
GMTK07 G5KC 63 □80 Φ70G7 M6Depth 15(PCD90) 5 40(30) Φ16 M5
G5LC Φ19
K2KC □130 Φ110G7 M8Depth 13(PCD145) Φ16
K2LC Φ19
K3YC 81 M8Depth 16(PCD145) 8 58(40) Φ24
GMTK15 K3LC 77 □130 Φ110G7 M8Depth 16(PCD145) 8 58(40) Φ19 M5
K3MC Φ22
K3YC Φ24
GMTK22 L1PC 121 □180 Φ114.3G7 M12Depth 16(PCD200) 8 80(55) Φ28 M6
L1RC Φ35

6. Options

Flange


・To convert a face-mount model to flange-mount, use the S flange or M flange. (Both S and M flanges are made of cast iron.)

SFlange ：Eccentric type


・Applicable flange code

Reduction ratio Rated Input
0.1kW 0.2kW 0.4kW 0.75kW
5 UFS27 (UFS25) UFS27 UFS37
10、15、20、25 UFS15 (UFS13) UFS15 (UFS13)
30、40、50 UFS27 (UFS25) UFS37
60、75 UFS27 (UFS25)
100、120、165、200 UFS37

・The code in parenthesis ( ) is for an S flange that is one frame size smaller.


・Size (Unit: mm), PDF drawings

Flange Code Cs E F H R O Y Z Mass
kg		 PDF drawing Standard Price Delivery
UFS13 18 4 12 135 32 125 150 9 1.2 PDF Contact us for details. Contact us for details.
UFS15 20 4 12 150 32 140 170 9 1.3 PDF Contact us for details. Contact us for details.
UFS25 20 4 16 150 41 (32) 140 170 9 1.4 PDF Contact us for details. Contact us for details.
UFS27 24 4 16 175 41 (32) 165 200 11 2.3 PDF Contact us for details. Contact us for details.
UFS37 24 4 18 175 47 165 200 11 2.1 PDF Contact us for details. Contact us for details.

・The four bolts are included with the flange.

・The dimensions in parenthesis ( ) apply if the flange is mounted to 0.1kW, 0.2kW motor with a reduction ratio of 1/5.


MFlange ：Concentric type


・Applicable flange code

Reduction ratio Rated Input
0.1kW 0.2kW 0.4kW 0.75kW 1.5kW
5 UFM26 UFM26 UFM39 UFM48
10、15、20、25 UFM15 UFM15
30 UFM26 UFM39 UFM48
40、50
60、75 UFM26
100、120、165、200 UFM39 UFM48

・Size (Unit: mm), PDF drawings

Flange Code E F H R O Y Z Mass
kg		 PDF drawing Standard Price Delivery
UFM15 3.5 12 155 32 145 170 M10 1.4 PDF Contact us for details. Contact us for details.
UFM26 3.5 16 165 41 (32) 148 185 M12 1.7 PDF Contact us for details. Contact us for details.
UFM39 4 18 190 47 180 215 M12 2.5 PDF Contact us for details. Contact us for details.
UFM48 5 26.5 280 60.5 260 290 Φ12 7.5 PDF Contact us for details. Contact us for details.

・The four bolts are included with the flange.

・The dimensions in parenthesis ( ) apply if the flange is mounted to 0.1kW, 0.2kW motor with a reduction ratio of 1/5.