Conveyor Chain for Water Treatment Plants ACRD Type
- Drive chain made of SUS400 series stainless steel for water treatment machines.
- Rolling contact with sprockets increases wear resistance.
Catalogs ・Instruction Manuals
List of Models
※Click to see detailed information.
※Maximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain.
This value will differ by manufacturer and is not a guaranteed value.
※Contact a Tsubaki representative regarding average tensile strength.
| Size | Pitch | Roller diameter |
Inner width of inner link |
|---|---|---|---|
| Φmm | mm | ||
| ACRD08 | 101.6 | 22.2 | 27.6 |
| ACRD10 | 127 | 29 | 30.6 |
| ACRD12 | 152.4 | 34.9 | 38.9 |
| ACRD17 | 152.4 | 40.1 | 38.1 |
