Poly Steel Attachment Chains
- A chain using engineering plastic for the links (polyacetal) and 18-8SUS(SUS304 equivalent) stainless steel for the outer links.
- It has superior features such as long life and low noise without lubrication.
- BS Series Poly Steel Chain available as a made-to-order product.
Features
- ・Lube-free, corrosion resistant.
- ・Low Noise ：5dB quieter than steel chain.
- ・Lighter ：50% lighter than steel chain.
- ・Operating Temperature Range ：Operating temperature range: Can operate between -20ºC to 80ºC.
- ・Can be used with standard RS Sprockets.
- ・BS Series available made-to-order. (Compatible size ： RS08B-PC, RS10B-PC, RS12B-PC)
Notes
- ・No offset links available. Use an even number of links.
- ・Connecting link
- RS40-PC～RS60-PC：Same as with stainless steel (SS Series) drive chain.
- RS25-PC、RS35-PC：Uses a special connecting link.
- ・When replacing Stainless Steel (SS Series) RS Attachment Chain with Poly Steel Attachment Chain:
- Check the load acting on the chain.
- Use beneath the maximum allowable load values.
- ・Guide rails should support the bottom face of the inner link plates.
- ・Only EP Attachments can be attached to inner links. Other attachments will be attached on every even outer link.
- ・The pin heads of the base chain are not riveted.
When selecting sprocket specifications
It is necessary to select a sprocket specification that corresponds to the customer's operating environment and the chain specification used.
Please use standard RS stainless steel sprockets for Poly steel attachment chain.
Click here for the chain/sprocket compatibility table.
Chain/sprocket compatibility table
