Selection Guide   Top chain

・Click an icon to see the features of each series.

・Selecting a condition will mask inapplicable series.

Required features 



























Material 





























Chain type  
      
 

WT0405
-W

WT0705
-W

WT1505
-K

WT1505
G-K

WT1505
GTO-K

WT1506
-K

WT1515
-W

WT1515
F-W

WT1516
F-W

WT1515
VG-W

WT1515G
-W

WT1516
-W

BTN5
 

BTN5
-A

BTC6
 

BTCP6
 

BTC6
-T

BTO6
 

BTN6
 

WT1907
-K

BTC8
 

BTC8
-A

BTC8S
 

WT2525-K
 

WT2525
VG-K

WT2250
FT

WT2250
FG

WT2250
With flights

WT2250
VG

WT2505
-K

WT2506
-K

WT2515
-W

WT2515G
-W

WT2515F
-W

BTM8H
 

WT2705
-K

WT2706
-K

WT3005
-K

WT3005
G-K

WT3086
-K

WT3086
G-K

WT3109
-W

WT3816
-K

WT3827
-K

WT3835
-K

WT3835
-T

BTH16
 

WT5707
-K

WTU3015
T-K

WTU3015
T-K-SUSP

WT0705
-M

BTC4
-M

WT1505
G-M

WT1505
GTO-M

WT1515
G-M

BTC8
H-M

BTM8
H-M

WT2505
-M

WT2505
G-M

WT2515
G-M

WTM2535
G-M

BTO8
-M

WT3005
G-M

WT3086
G-M

WT3835
G-M

TTP
 

TTP
-P

TTPH
 

TTPH
-P

TTPT
 

TTPDH
 

TTPM
 

TPF
 

TP
-OTD

TPS
 

TPS
-P

TPH
 

TPH
-P

TPSS
 

TPM
 

TPM
-SN

TPM
-P-SN

TPRF
2040

TPRF
2060

TTUP
 

TTUP
-P

TTUP
-M

TTUPT
-M

TTUPH
 

TTUPS
 

TTUPS
-H

TTUPM
-P

TTUPM
838H

TPU
 

TPU
-P

TPU
-LH

TPUT
-LH

TPUS
 

TPUM
 

TPUH
-BO

TPU
-USR

TTUP
-LLPC

TPUSR
550

TPUSR
550P

TPUSR
826

TPUSR
826P

TP
-UB36

TPUN
 

TPUN550
-LH

TPUN535
-LH

TP-50UNS
 

TP-50UNS
-D76

TP-50UN
-T95

TPCC420
 

TPCC420
-T

TORP
 

TOSP
 

TP
-36AK

TN
 

TNU
 

TP
-PT

TP
-PTS

TP
-1873-T

TTPDH
-LBP

TPUS
-LBP

TPUS953Y
-T-LAP

TP-30UTW
-LAP

TP-36UTW
-LAP

RSP
 

RSP
-P

RSP
-SL

RSP
-PO8PF

RSP
-PO8PFT

RSP
-2

RSP
-CU

RSP
-P-CU

RSP
-T-CU

RSP
-CU-2

RF-SC
RS-SC

Application table by material 
Metal detectable
Prevent the growth of fungi
Ultraviolent resistant
Impact Resistant
Electroconductive
Only for dry conditions
For low-temperature environments
For high-temperature environments
High-speed operation
Chemical resistant (corrosion resistant)
High friction (prevent slipping)
Low friction (smooth sliding)
Reduces generation of wear debris
General-purpose
Normal   Note) 2 None                      
Low Friction/Anti-Wear LFW                      
LFG                      
LFB                      
Low Friction/Anti-Wear CB                      
Advanced Low Friction/Wear Resistant ALF                        
Low Friction NLF                        
Low Friction WR                        
Heat Resistant/High Speed KV150 (For dry conditions)                    
KV180                    
KV250                    
Low Friction/Anti-Wear HG                        
High Temperature HTW                      
High speed (For dry conditions) HS                        
Low Temperature LTW                          
Chemical Resistant Y                      
Super chemical Resistant SY                      
Electroconductive E                          
Impact Resistant (For dry conditions) DIA                      
Impact Resistant (For wet and dry conditions) DIY                      
Antibacterial/Mold Resistant MWS                      
Metal Detectable (For dry conditions) MPD                      
Metal Detectable (For wet and dry conditions) MPW                          
Antistatic SE                          
Middle Friction (For dry conditions) MF                        
Acid Resistant AR                          
Ultraviolet Resistant UVR                          
Food Conveying PFS                            
Heat Resistant / Radiation Resistant/Vacuum Resistant PK150                        
Low Temperature/Chemical Resistant UPE                    
  • Note)1. “◎” Excellent “●” Good “▲” Sufficient
  • Note)2. Electrostatic Preventive properties have been added to standard series gray, blue, and green chain.
×
( Drag to move. )

Plastic modular chain (wide type)

WT1505-K

Pitch mm 15
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1505G-K

Pitch mm 15
Chain width mm 152.4 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer.
  5. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1505GTO-K

Pitch mm 15
Chain width mm 235.6 ~ 1531
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. Extended plate edges facilitate smoother right-angle transfers.
  5. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1506-K

Pitch mm 15
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  5. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTN5

Pitch mm 15
Chain width mm 76 ~ 1520
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. 30% open area ratio means easy washing and clean-up.
  5. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTN5-A

Pitch mm 15
Chain width mm 76 ~ 1520
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. 30% open area ratio means easy washing and clean-up.
  5. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer.

×
( Drag to move. )

Plastic modular chain (wide type)

BTC6

Pitch mm 19.05
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 19.05mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTCP6

Pitch mm 19.05
Chain width mm 76.2 ~ 1524
  1. This is the open hole version of the BTC6. Using these holes allows for vacuum conveyance of goods.
  2. Snap attachment used on lock pin retention system allows easy installation and maintenance.

×
( Drag to move. )

Plastic modular chain (wide type)

BTC6-T

Pitch mm 19.05
Chain width mm 609.6 ~ 1524
  1. This version of the BTC6 has float-preventive tabs to prevent the chain from floating above the frame.
  2. Snap attachment used on lock pin retention system allows easy installation and maintenance.

×
( Drag to move. )

Plastic modular chain (wide type)

BTO6

Pitch mm 19.05
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 19.05mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  5. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTN6

Pitch mm 19.05
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Small chain pitch of 19.05mm is ideal for conveying small, lightweight containers.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. 53% open area ratio means easy washing and clean-up.
  5. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1907-K

Pitch mm 19.05
Chain width mm 228.6 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. A combination of transfer plate and raised rib type chain, which has no steps that can lead to container topping in connecting areas, is perfect for shower equipment.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTC8

Pitch mm 25.4
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTC8-A

Pitch mm 25.4
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer.
  3. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTC8S

Pitch mm 25.4
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2250FT

Pitch mm 25.4
Chain width mm 85 ~ 1700
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2250FG

Pitch mm 25.4
Chain width mm 85 ~ 1700
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2250With flights

Pitch mm 25.4
Chain width mm 85 ~ 1700
  1. Flights for inclined conveyance of loose material can be attached to WT2250FT and FG Series.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2250VG

Pitch mm 25.4
Chain width mm 85 ~ 1700
  1. Features rubber pads on the conveying surface -- ideal for inclined box conveyance.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2505-K

Pitch mm 25.4
Chain width mm 76.2 ~ 3048
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2506-K

Pitch mm 25.4
Chain width mm 76.2 ~ 3048
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTM8H

Pitch mm 25.4
Chain width mm 152.4 ~ 1524
  1. Magnets embedded in the links enable inclined conveyance by holding conveyed (magnetic) objects to the link surface.
  2. Because no fl ights are used, it prevents damage caused by friction between the conveyed goods and the flights.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2705-K

Pitch mm 27.2
Chain width mm 228.6 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2706-K

Pitch mm 27.2
Chain width mm 228.6 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3005-K

Pitch mm 30
Chain width mm 76.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3005G-K

Pitch mm 30
Chain width mm 152.4 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3086-K

Pitch mm 30
Chain width mm 170 ~ 1530
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3086G-K

Pitch mm 30
Chain width mm 170 ~ 1530
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. With tab guide attachments, suitable for lateral conveyor-to-conveyor transfer.
  4. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  5. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3816-K

Pitch mm 38
Chain width mm 200 ~ 3500
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. Conveying surface is perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on conveying surface.
  4. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3827-K

Pitch mm 38.1
Chain width mm 457.2 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. A combination of transfer plate and raised rib type chain, which has no steps that can lead to container topping in connecting areas, is perfect for shower equipment.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3835-K

Pitch mm 38.1
Chain width mm 152.4 ~ 1524
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

BTH16

Pitch mm 50.8
Chain width mm 400 ~ 1600
  1. High-rigidity chain provides the highest maximum allowable load for Plastic Modular Chain (62 kN/m). Suitable for conveying bulk quantities or heavy objects.
  2. A special relief pattern embossed on the top surface of the chain provides an anti-slip effect. Its design acts to minimize slippage and works to prevent objects from becoming snagged on the chain surface.
  3. Slide lock pin retention system allows easy installation and maintenance.

×
( Drag to move. )

Plastic modular chain (wide type)

WT5707-K

Pitch mm 57.15
Chain width mm 457.2 ~ 3048
  1. Combination of wide type and narrow type plastic module like bricks enables a wide conveying surface suitable for conveying bulk quantities.
  2. Simple construction with four parts allows for easy part replacement and reduced maintenance time.
  3. A combination of transfer plate and raised rib type chain, which has no steps that can lead to container topping in connecting areas, is perfect for shower equipment.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

BTC4-M

Pitch mm 12.7
Chain width mm 50
  1. Small chain pitch of 12.7mm is ideal for conveying small, lightweight containers.
  2. Underside of links is curved, allowing the chain to wrap around 18mm diameter shafts and effectively reduce the dead space between conveyors.
  3. Unique multi-hinge link construction ensures smooth accumulation and smooth transition between conveyors.
  4. All-plastic construction means the chain is lightweight and easy to handle, and eliminates the need to sort and separate for waste disposal.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT1505G-M

Pitch mm 15
Chain width mm 75.8
  1. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  2. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT1505GTO-M

Pitch mm 15
Chain width mm 82.8, 158.8
  1. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  2. Extended plate edges facilitate smoother right-angle transfers.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT1505TOD-M

Pitch mm 15
Chain width mm 160
  1. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  2. Extended taper on one side of the base chain enables smooth right-angle transfers.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT1515G-M

Pitch mm 15
Chain width mm 50
  1. Small chain pitch of 15mm is ideal for conveying small, lightweight containers.
  2. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

BTC8H-M

Pitch mm 25.4
Chain width mm 82.6
  1. Ideal for conveying trays using multiple chain strands running side-by-side.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

BTM8H-M

Pitch mm 25.4
Chain width mm 82.6
  1. Ideal for conveying trays using multiple chain strands running side-by-side.
  2. Magnets embedded in the links enable inclined conveyance of metal trays.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT2505-M

Pitch mm 25.4
Chain width mm 82.6, 114.3
  1. Chain pitch of 25.4mm is ideal for conveying medium-sized containers.
  2. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT2505G-M

Pitch mm 25.4
Chain width mm 82.6, 114.3
  1. Chain pitch of 25.4mm is ideal for conveying medium-sized containers.
  2. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT2505TOD-M

Pitch mm 25.4
Chain width mm 160, 236.2
  1. Chain pitch of 25.4mm is ideal for conveying medium-sized containers.
  2. Extended taper on one side of the base chain enables smooth right-angle transfers.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

BTO8-M

Pitch mm 25.4
Chain width mm 83
  1. Stable conveyance of small items and smooth transitions between conveyors are possible.
  2. Plates are perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on plate surfaces.
  3. All-plastic construction means light weight and easy handling.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT3005G-M

Pitch mm 30
Chain width mm 75.8, 113.8
  1. Chain pitch is 30mm; chain can be driven using the same shafts as the WT1500 series.
  2. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT3086G-M

Pitch mm 30
Chain width mm 84.5
  1. Chain pitch is 30mm; chain can be driven using the same shafts as the WT1500 series.
  2. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT3835G-M

Pitch mm 38.1
Chain width mm 82.6
  1. Chain pitch of 38.1mm is ideal for conveying medium-sized containers.
  2. Tab guide attachments make this chain ideal for layouts with lateral transitions between conveyors.
  3. All-plastic construction. Lightweight and easy to handle.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3835-T

Pitch mm 38.1
Chain width mm 152.4 ~ 1524
  1. Mass handling is possible due to the wide carry-way, which is a combination of a wide module with a narrow module in a brick-layered array.
  2. WT3835 with float-preventive tabs, which prevents chains from floating, is suitable for vertical vacuum conveyors .
  3. Lightweight and easy-handling due to all plastic-made chain.
  4. Easy to connect and disconnect the chain with a screwdriver due to the adoption of the slide plug for retaining pin.

×
( Drag to move. )

Plastic top chain

TTP

Pitch mm 38.1
Chain width mm 63.5, 76.2, 82.6, 101.6, 114.3, 127, 152.4, 165.1, 190.5
Plate thickness mm 4.0
  1. Worldwide standard shape.
  2. Wide range of plate widths available. Can accommodate a wide range of conveyed object sizes.

×
( Drag to move. )

Plastic top chain

TTP-P

Pitch mm 38.1
Chain width mm 63.5, 76.2, 82.6, 101.6, 114.3, 127, 152.4, 165.1, 190.5
Plate thickness mm 4.0
  1. Worldwide standard shape.
  2. Wide range of plate widths available. Can accommodate a wide range of conveyed object sizes.
  3. All-plastic construction means light weight and easy handling.
  4. Longer service life under water lubrication than stainless steel pins.

×
( Drag to move. )

Plastic top chain

TTPH

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.0
  1. Comb-toothed plates minimize gaps between links.
  2. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling duringconveyance.
  3. Both ends of the plates are slightly chamfered, ensuring smooth lateral plate-to-plate transfers between adjacent chains.
  4. Same basic dimensions as TTP826 plastic top chain. Can provide stable container conveyance simply by replacing the chain.

×
( Drag to move. )

Plastic top chain

TTPH-P

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.0
  1. Comb-toothed plates minimize gaps between links.
  2. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling duringconveyance.
  3. Both ends of the plates are slightly chamfered, ensuring smooth lateral plate-to-plate transfers between adjacent chains.
  4. Same basic dimensions as TTP826 plastic top chain. Can provide stable container conveyance simply by replacing the chain.
  5. All-plastic construction means light weight and easy handling.

×
( Drag to move. )

Plastic top chain

TTPT

Pitch mm 38.1
Chain width mm 82.6, 114.3, 190.5
Plate thickness mm 4.8
  1. Plates are thicker than TTP chain. Ideal for applications where the plates would be susceptible to wear.

×
( Drag to move. )

Plastic top chain

TTPDH

Pitch mm 38.1
Chain width mm 190.5, 254, 304.8
Plate thickness mm 4.8
  1. Higher maximum allowable load than TTP chain (approx. double). Ideal for higher applied load conditions.
  2. Plates are wider, and thus can be used to convey larger objects.

×
( Drag to move. )

Plastic top chain

TTPM

Pitch mm 19.05
Chain width mm 50
Plate thickness mm 3.2
  1. Chain pitch is approximately one-half of conventional conveyor chains, effectively lowering conveyor noiselevel and reducing the gap between the end of one conveyor and the start of the next conveyor.
  2. With a plate width of 50mm, this plastic top chain is ideal for conveying small objects.

×
( Drag to move. )

Plastic top chain

TPF

Pitch mm 38.1
Chain width mm 76.2, 82.6
Plate thickness mm 3.2
  1. Approx. 40% higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions.
  2. 3.2mm plate thickness, the same plate thickness as TT stainless steel top chain.

×
( Drag to move. )

Plastic top chain

TP-OTD

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.0
  1. Approx. 30% higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions.
  2. Uses the same 4.0mm plate thickness as TTP and TTUP types, making it easy to adjust the level of wearstrips of lines running in parallel.

×
( Drag to move. )

Plastic top chain

TPS

Pitch mm 38.1
Chain width mm 76.2, 82.6, 101.6, 114.3, 127
Plate thickness mm 4.0
  1. Approx. 40% higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions.
  2. Uses the same sprockets as TTUP and TPU sideflexing plastic top chains. Designed to allow common sprockets to be used.

×
( Drag to move. )

Plastic top chain

TPS-P

Pitch mm 38.1
Chain width mm 82.6, 114.3
Plate thickness mm 4.0
  1. Higher maximum allowable load than TTP plastic top chain. Ideal for higher applied load conditions.
  2. Uses the same sprockets as TTUP and TPU sideflexing plastic top chains. Designed to allow common sprockets to be used.
  3. All-plastic construction means light weight and easy handling.
  4. Longer service life under water lubrication than stainless steel pins.

×
( Drag to move. )

Plastic top chain

TPH

Pitch mm 38.1
Chain width mm 83
Plate thickness mm 4.0
  1. Comb-toothed plates minimize gaps between links.
  2. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling during conveyance.
  3. Plates are perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on plate surface.
  4. Same basic dimensions as TPS plastic top chain. Can provide stable container conveyance simply by replacing the chain.

×
( Drag to move. )

Plastic top chain

TPH-P

Pitch mm 38.1
Chain width mm 83
Plate thickness mm 4.0
  1. Comb-toothed plates minimize gaps between links.
  2. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling during conveyance.
  3. Plates are perforated with numerous drainage holes that effectively remove excess lubricant and water remaining on plate surface.
  4. Same basic dimensions as TPS plastic top chain. All-plastic construction means light weight and easy handling. Longer service life under water lubrication than stainless steel pins.

×
( Drag to move. )

Plastic top chain

TPSS

Pitch mm 38.1
Chain width mm 114.3, 127, 152.4, 190.5
Plate thickness mm 4.8
  1. Chain is 2.3 times stronger than TTP chains. Suitable for higher load applications.
  2. Can handle larger and heavier products.

×
( Drag to move. )

Plastic top chain

TPM

Pitch mm 19.265
Chain width mm 82.6
Plate thickness mm 4.0
  1. Chain pitch is approximately one-half that of conventional conveyor chains, effectively reducing conveyor noise levels and reducing the gap between the end of one conveyor and the start of the next conveyor.
  2. Type TPS sprockets (odd number of teeth) can be used. Designed to allow common sprockets to be used.
  3. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic top chain

TPM-SN

Pitch mm 19.05
Chain width mm 82.6
Plate thickness mm 4.0
  1. Applies the concept of silent chain engagement. Extremely effective in reducing conveyor noise.
  2. Uses special sprockets. Suppresses chordal action of the chain when engaging with the sprocket, enabling stable chain travel.
  3. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic top chain

TPM-P-SN

Pitch mm 19.05
Chain width mm 82.6
Plate thickness mm 4.0
  1. Applies the concept of silent chain engagement. Extremely effective in reducing conveyor noise.
  2. Uses special sprockets. Suppresses chordal action of the chain when engaging with the sprocket, enabling stable chain travel.
  3. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.
  4. All-plastic construction means light weight and easy handling.
  5. Longer service life under water lubrication than stainless steel pins.

×
( Drag to move. )

Plastic top chain

TPRF2040

Pitch mm 25.4
Chain width mm 50
Plate thickness mm 3.0
  1. With a plate width of 50mm and a 25.4mm pitch, this plastic top chain is ideal for conveying small objects.
  2. RF2040S sprockets can be used (19 teeth or more).

×
( Drag to move. )

Plastic top chain

TPRF2060

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 3.2
  1. Double-pitch top chain featuring wider plastic top plates for better product support.
  2. RF2060S sprockets can be used (19 teeth or more).

×
( Drag to move. )

Plastic top chain

TTUP

Pitch mm 38.1
Chain width mm 82.6, 114.3, 190.5
Plate thickness mm 4.0
  1. Most popular chain series designed for use in sideflexing conveyors.
  2. Simple construction facilitates washing and clean-up.
  3. Uses the same sprockets as TPS and TTU plastic top chains. Designed to allow common sprockets to be used.

×
( Drag to move. )

Plastic top chain

TTUP-P

Pitch mm 38.1
Chain width mm 82.6, 114.3
Plate thickness mm 4.0
  1. Most popular chain series designed for use in sideflexing conveyors.
  2. Simple construction facilitates washing and clean-up.
  3. Uses the same sprockets as TPS and TTU plastic top chains. Designed to allow common sprockets to be used.
  4. All-plastic construction means light weight and easy handling.
  5. Longer service life under water lubrication than stainless steel pins.

×
( Drag to move. )

Plastic top chain

TTUP-M

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.0
  1. Combining a magnetic wearstrip prevents the chain from floating in curved sections.

×
( Drag to move. )

Plastic top chain

TTUPT-M

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.8
  1. Combining a magnetic wearstrip prevents the chain from floating in curved sections.

×
( Drag to move. )

Plastic top chain

TTUPH

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.0
  1. Comb-toothed plates minimize gaps between links.
  2. Surface of top plate is fl atter and smoother. Effective in preventing container wobbling and toppling during conveyance.
  3. Same basic dimensions as TTUP plastic top chain. Can provide stable container conveyance simply by replacing the chain.
  4. Both ends of the plate are slightly chamfered, ensuring smooth lateral plate-to-plate transfers between adjacent chains.

×
( Drag to move. )

Plastic top chain

TTUPS

Pitch mm 38.1
Chain width mm 114.3, 127, 152.4, 190.5
Plate thickness mm 4.8
  1. Chain is 1.8 times stronger than TTUP chains. Suitable for higher load applications.
  2. Can handle larger and heavier products.

×
( Drag to move. )

Plastic top chain

TTUPS-H

Pitch mm 25.4
Chain width mm 84
Plate thickness mm 9.8
  1. Features 9.8mm thick top plates that are harder to crack than conventional plastic top chain plates.
  2. Uses a D-pin for the connecting pin to prevent cracks from forming from the interference fit area between pin hole and pin. The chain can also be connected or disconnected from either side when it is time for maintenance.

×
( Drag to move. )

Plastic top chain

TTUPM-P

Pitch mm 12.7
Chain width mm 50
Plate thickness mm 2.8
  1. Small chain pitch of 12.7mm is effective in lowering conveyor noise level and reducing the gap between the end of one conveyor and the start of the next conveyor.
  2. With a plate width of 50mm, this plastic top chain is ideal for conveying small objects.

×
( Drag to move. )

Plastic top chain

TPU

Pitch mm 38.1
Chain width mm 82.6, 114.3
Plate thickness mm 4.0
  1. Equipped with fl oat-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.
  2. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used.

×
( Drag to move. )

Plastic top chain

TPU-P

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.0
  1. Equipped with fl oat-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.
  2. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used.
  3. All-plastic construction means light weight and easy handling.
  4. Longer service life under water lubrication than stainless steel pins.

×
( Drag to move. )

Plastic top chain

TPU-LH

Pitch mm 38.1
Chain width mm 114.3
Plate thickness mm 4.0
  1. Link height is lower than TPU chain, enabling more compact conveyor layouts.

×
( Drag to move. )

Plastic top chain

TPUT-LH

Pitch mm 38.1
Chain width mm 82.6, 114.3
Plate thickness mm 4.8
  1. Link height is lower than TPU chain, enabling more compact conveyor layouts.
  2. Plate thickness (4.8mm) is thicker than TPU chain. Ideal for applications where the plates would be susceptible to wear.

×
( Drag to move. )

Plastic top chain

TPUS

Pitch mm 38.1
Chain width mm 114.3, 190.5, 254, 304.8
Plate thickness mm 4.8
  1. Approx. 2.2 times higher maximum allowable load than TPU chain. Ideal for higher load applications.
  2. Plates are wider, and thus can be used to convey larger objects.

×
( Drag to move. )

Plastic top chain

TPUM

Pitch mm 19.265
Chain width mm 82.6
Plate thickness mm 4.0
  1. Chain pitch is approximately one-half that of conventional conveyor chains, effectively reducing conveyor noise levels and reducing the gap between the end of one conveyor and the start of the next conveyor.
  2. Type TPS sprockets (odd number of teeth) can be used. Designed to allow common sprockets to be used.
  3. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic top chain

TPUH-BO

Pitch mm 38.1
Chain width mm 82.6, 114.3
Plate thickness mm 4.8
  1. Has a smaller minimum sideflex radius than TTUP or TPU series (R=190mm), allowing for compact layouts.
  2. Comb-toothed plates minimize gaps between links.

×
( Drag to move. )

Plastic top chain

TPU-USR

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.0
  1. Has a smaller minimum sideflex radius than TTUP or TPU series (R=190mm), allowing for compact layouts.
  2. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used.
  3. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic top chain

TTUP-LLPC

Pitch mm 38.1
Chain width mm 82.6
Plate thickness mm 4.8
  1. Prevents floating thanks to its low center of gravity and relatively small sideflex radius.
  2. Uses the same sprockets as TPS and TTUP plastic top chains. Designed to allow common sprockets to be used.

×
( Drag to move. )

Plastic top chain

TPUSR550

Pitch mm 31.75
Chain width mm 55
Plate thickness mm 4.0
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups.
  3. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises.
  4. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic top chain

TPUSR826

Pitch mm 31.75
Chain width mm 82.6
Plate thickness mm 4.0
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups.
  3. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises.
  4. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic top chain

TP-UB36

Pitch mm 36
Chain width mm 55
Plate thickness mm 4.0
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Comb-toothed plates minimize gaps between links.
  3. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises.

×
( Drag to move. )

Plastic top chain

TPUN

Pitch mm 50
Chain width mm 51.5
Plate thickness mm ---
  1. Small sideflex radius (140mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Approx. 1.8 times higher maximum allowable load than TTUP chain. Ideal for higher load applications.
  3. Uses D-pins that protrude from one side only, preventing poor articulation.
  4. Pivot misassembly prevention system prevents faulty engagement of the chain and sprocket by eliminating mistakes in the direction of pivot insertion.

×
( Drag to move. )

Plastic top chain

TPUN550-LH

Pitch mm 50
Chain width mm 55
Plate thickness mm ---
  1. Small sideflex radius (150mm) enables more compact conveyor layouts.
  2. This series features a link height often seen in overseas markets. Link height is slightly lower than TPUN chain.

×
( Drag to move. )

Plastic top chain

TPUN535-LH

Pitch mm 50
Chain width mm 53.5
Plate thickness mm ---
  1. Small sideflex radius (150mm) enables more compact conveyor layouts.
  2. This series features a link height often seen in overseas markets. Link height is slightly lower than TPUN chain.

×
( Drag to move. )

Plastic top chain

TP-50UNS

Pitch mm 50
Chain width mm 51
Plate thickness mm ---
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Chain has a higher strength, which makes it suitable for high load applications.

×
( Drag to move. )

Plastic top chain

TP-50UNS-D76

Pitch mm 50
Chain width mm 51
Plate thickness mm ---
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Chain has a higher strength, which makes it suitable for high load applications.
  3. Constructed with pushers to move products up or down inclines.

×
( Drag to move. )

Plastic top chain

TP-50UN-T95

Pitch mm 50
Chain width mm 95
Plate thickness mm 4.0
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Constructed with crescent-shaped top plates to minimize the gap in straight and curved sections for better product handling.

×
( Drag to move. )

Plastic top chain

TPCC420

Pitch mm 90
Chain width mm 42
Plate thickness mm ---
  1. Simple plastic chain with offset link design. For conveying crates, boxes, and the like.

×
( Drag to move. )

Plastic top chain

TPCC420-T

Pitch mm 90
Chain width mm 42
Plate thickness mm ---
  1. Simple plastic chain with offset link design. For conveying crates, boxes, and the like.

×
( Drag to move. )

Plastic top chain

TORP

Pitch mm 76.2
Chain width mm 114.3
Plate thickness mm 4.0
  1. For horizontal circular conveyance. Designed so the entire surface can be used to convey objects.
  2. No return-way chain, so the height of the conveyer can be reduced.
  3. Crescent-shaped top plates. Space between links remains constant in curved sections, minimizing conveyed objects becoming pinched or caught in the gap.

×
( Drag to move. )

Plastic top chain

TOSP

Pitch mm 76.2
Chain width mm 114.3
Plate thickness mm 4.0
  1. For horizontal circular conveyance. Designed so the entire surface can be used to convey objects.
  2. No return-way chain, so the height of the conveyer can be reduced.
  3. Crescent-shaped top plates. Space between links remains constant in curved sections, minimizing conveyed objects becoming pinched or caught in the gap.

×
( Drag to move. )

Plastic top chain

TP-36AK

Pitch mm 36
Chain width mm 60
Plate thickness mm 5.5, 6.5
  1. Chain is uniquely designed to keep the gaps at a minimum in straight and curved sections for better product handling.
  2. High-friction top plates can be assembled with standard link materials, making this chain suitable for incline or decline conveyors.

×
( Drag to move. )

Plastic top chain

TN

Pitch mm 19.05
Chain width mm 82.6
Plate thickness mm 4.0
  1. Suitable for heavy loads and long conveyor applications because of high allowable chain load(except for SS and PC types).
  2. Replacing top plates is simple and easy.

×
( Drag to move. )

Plastic top chain

TNU

Pitch mm 19.05
Chain width mm 82.6, 114.3, 127
Plate thickness mm 4.0
  1. Curved conveyance chain with high allowable load (double the allowable load of TTUP chain).
  2. Replacing top plates is simple and easy.

×
( Drag to move. )

Plastic top chain

TP-PT

Pitch mm 19.05
Chain width mm 82.6, 114.3
Plate thickness mm 4.0
  1. Curved conveyance chain for heavier loads (high allowable chain load).
  2. Comb-toothed plates minimize gaps between links.
  3. Top plates snap on to a sideflexing roller chain. The top plates can be replaced, if desired.

×
( Drag to move. )

Plastic top chain

TP-PTS

Pitch mm 19.05
Chain width mm 254
Plate thickness mm 6.0
  1. Curved conveyance chain for heavier loads (high allowable chain load).
  2. Comb-toothed plates minimize gaps between links.
  3. Top plates snap on to a sideflexing roller chain. The top plates can be replaced, if desired.

×
( Drag to move. )

Plastic top chain

TP-1873-T

Pitch mm 19.05
Chain width mm 82.6
Plate thickness mm 4.0
  1. Curved conveyance chain for heavier loads (high allowable chain load).
  2. Top plates snap on to a sideflexing roller chain. The top plates can be replaced, if desired.

×
( Drag to move. )

Plastic top chain

TP-1843-G

Pitch mm 12.7
Chain width mm 31
  1. グリッパーチェーンは搬送物の両側からグリップして搬送物を上げ下げするチェーンです。
  2. グリッパラバーの形状、材質が選択可能です。
  3. トッププレートおよびグリッパラバーの取替えが可能です。

×
( Drag to move. )

Plastic top chain

TP-1873-G

Pitch mm 19.05
Chain width mm 86
  1. グリッパーチェーンは搬送物の両側からグリップして搬送物を上げ下げするチェーンです。
  2. グリッパラバーの形状、材質が選択可能です。
  3. トッププレートおよびグリッパラバーの取替えが可能です。

×
( Drag to move. )

Plastic top chain

TTPDH-LBP

Pitch mm 38.1
Chain width mm 190.5, 254.0, 304.8
  1. Free rotation of plastic accumulation rollers protects conveyed objects from damage.
  2. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications.
  3. Coefficient of rolling friction for free-flow rollers is 0.10.

×
( Drag to move. )

Plastic top chain

TPUS-LBP

Pitch mm 38.1
Chain width mm 95.3, 190.5, 254.0, 304.8
  1. Free rotation of plastic accumulation rollers protects conveyed objects from damage.
  2. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications.
  3. Coefficient of rolling friction for free-flow rollers is 0.10.

×
( Drag to move. )

Plastic top chain

TP-30UTW-LAP

Pitch mm 30
Chain width mm 80
  1. Free rotation of plastic accumulation rollers protects conveyed objects from damage.
  2. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications.
  3. Coefficient of rolling friction for free-flow rollers is 0.07.

×
( Drag to move. )

Plastic top chain

TP-36UTW-LAP

Pitch mm 36
Chain width mm 120
  1. Free rotation of plastic accumulation rollers protects conveyed objects from damage.
  2. Ideal for minimizing marks or scratches on the bottom sides of conveyed objects and for reducing line pressure when used in accumulation applications.
  3. Coefficient of rolling friction for free-flow rollers is 0.07.

×
( Drag to move. )

Plastic block chain

RSP

Pitch mm 9.525, 12.7, 15.875, 19.05
Chain width mm 13, 20, 22.5, 30
  1. Smaller chain pitch than plastic top chain allows use of sprockets with a smaller outer diameter, effectively reducing the gap between the end of one conveyor and the start of the next conveyor.
  2. Diverse range of chain pitches and link widths available. Suitable for a wide range of applications.
  3. Standard ANSI sprockets can be used.
  4. Block shape and small link width ideal for conveying small goods.
  5. Multiple strands can be used in parallel; ideal for conveying pallets.

×
( Drag to move. )

Plastic block chain

RSP-P

Pitch mm 12.7, 19.05
Chain width mm 20, 30
  1. Smaller chain pitch than plastic top chain allows use of sprockets with a smaller outer diameter, effectively reducing the gap between the end of one conveyor and the start of the next conveyor.
  2. Diverse range of chain pitches and link widths available. Suitable for a wide range of applications.
  3. Standard ANSI sprockets can be used.
  4. Block shape and small link width ideal for conveying small goods.
  5. Multiple strands can be used in parallel; ideal for conveying pallets.

×
( Drag to move. )

Plastic block chain

RSP-SL

Pitch mm 12.7
Chain width mm 30
  1. Smaller chain pitch than plastic top chain allows use of sprockets with a smaller outer diameter, effectively reducing the gap between the end of one conveyor and the start of the next conveyor.
  2. Plastic Block Chain with top plates; ideal for conveying small goods.
  3. Suitable for suspended conveyance of goods between paralleled strands of chains.

×
( Drag to move. )

Plastic block chain

RSP-PO8PF

Pitch mm 12.7
Chain width mm 21.5
  1. Small pitch and small link width ideal for conveying small goods.
  2. Chain is designed to convey fl anged products supported between two strands of chains.
  3. Standard ANSI sprockets can be used.

×
( Drag to move. )

Plastic block chain

RSP-PO8PFT

Pitch mm 12.7
Chain width mm 21.5
  1. Small pitch and small link width ideal for conveying small goods.
  2. Chain is designed to convey fl anged products supported between two strands of chains. Protrusions on the surface enable centering of fl anged products.
  3. Standard ANSI sprockets can be used.

×
( Drag to move. )

Plastic block chain

RSP-PO12-2S

Pitch mm 19.05
Chain width mm 60
  1. Link width is double that of RSP-P012 chain. Suitable for conveying wider goods.
  2. Approx. 50% higher maximum allowable load than RSP-P012 plastic chain. Ideal for higher applied load conditions.

×
( Drag to move. )

Plastic block chain

RSP-2

Pitch mm 19.05
Chain width mm 60
  1. Link width is double that of RSP60 chain. Suitable for conveying wider goods.
  2. Approx. 40% higher maximum allowable load than RSP60 plastic chain. Ideal for higher applied load conditions.

×
( Drag to move. )

Plastic block chain

RSP-CU

Pitch mm 19.05
Chain width mm 30
  1. RSP60-CU chain designed for use in sidefl exing conveyors.

×
( Drag to move. )

Plastic block chain

RSP-P-CU

Pitch mm 19.05
Chain width mm 30
  1. RSP60-CU chain designed for use in sidefl exing conveyors.
  2. All-plastic construction means light weight and easy handling.
  3. Longer service life under water lubrication than stainless steel pins.

×
( Drag to move. )

Plastic block chain

RSP-CU-2

Pitch mm 19.05
Chain width mm 63
  1. Chain designed for use in sidefl exing conveyors. Suitable for conveying wider goods.
  2. Approx. 30% higher maximum allowable load than RSP60CU chain. Ideal for higher applied load conditions.
  3. Equipped with fl oat-preventive tabs. Keeps the chain securely in position.

×
( Drag to move. )

Snap cover chain

RF-SC, RS-SC

Pitch mm 9.525, 12.7, 15.875, 19.05, 25.4, 31.75
Chain width mm 17.5, 23.5, 29.0, 35.0, 42.5, 49.5
  1. Higher maximum allowable load than Plastic Block chain (type RS60-SC approx. seven times higher than RSP60 chain). Ideal for long, heavy-load conveyors.
  2. Plastic covers provide safety for both conveyed goods and people.
  3. Six different chain pitches available, suitable for a diverse range of applications.

×
( Drag to move. )

Plastic top chain

TPUS953Y-T-LAP

Pitch mm 38.1
Chain width mm 95.3
  1. Roller rotation reduces line pressure.
  2. Suitable for conveyor lines on which conveyed objects will accumulate.
  3. Enlarging the roller diameter from the φ9.5 of conventional products (TPUS953-T-LBP) to φ11 reduces the gap between rollers and links, which reduces the frequency of conveyed items getting caught.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT2515G-M

Pitch mm 25.4
Chain width mm 83.8
  1. Chain pitch of 25.4mm is ideal for conveying beverage containers. Uses special stepped plastic connecting pins and a plug-less structure that prevents plugs (parts that prevent pin drop-out) from dropping out.
  2. Entire chain is made of lightweight, easy to handle plastic.

×
( Drag to move. )

Plastic top chain

TTUPM-H

Pitch mm 25.4
Chain width mm 83.8
Plate thickness mm 8.7
  1. TTUPM-H Type uses the world’s first special double layer D-type plastic pin combining both plastic and metal.
  2. Ideal for preventing chain floating on curved sections when used in combination with magnet-embedded rails.

×
( Drag to move. )

Plastic modular chain (wide type)

WT3109-W

Pitch mm 31.75
Chain width mm 300 ~ 1200
  1. WT3109-W Series can now be used on low-floor man conveyors (conveyor height=250mm) thanks to its smaller chain pitch.
  2. A special relief pattern embossed on the top surface of the chain provides an anti-slip effect. Its design acts to minimize slippage and works to prevent objects from becoming snagged on the chain surface.
  3. Slide lock pin retention system allows easy installation and maintenance.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1515-W

Pitch mm 15
Chain width mm 50 ~ 500
  1. Users can select chain width in 50mm units (standard configurations).
  2. Perfect for conveying beverage containers as well as mechanical parts.
  3. Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1515G-W

Pitch mm 15
Chain width mm 100 ~ 500
  1. Users can select chain width in 50mm units (standard configurations).
  2. Perfect for conveying beverage containers as well as mechanical parts.
  3. Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use.
  4. There is no need to worry about belt meandering thanks to the integrated tab guide attachments.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2515-W

Pitch mm 15
Chain width mm 85 ~ 1700
  1. The chain consists of a combination of 85mm and 170mm wide modular links.
  2. Uses a plug to prevent pin drop out.Makes chain maintenance (cutting/connecting) easy.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2515G-W

Pitch mm 15
Chain width mm 85 ~ 1700
  1. The chain consists of a combination of 85mm and 170mm wide modular links.
  2. Uses a plug to prevent pin drop out.Makes chain maintenance (cutting/connecting) easy.
  3. There is no need to worry about meandering thanks to the tab guide attachments.

×
( Drag to move. )

Plastic top chain

TPUSR550P

Pitch mm 31.75
Chain width mm 55
Plate thickness mm 4.0
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups.
  3. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises.
  4. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic top chain

TPUSR826P

Pitch mm 31.75
Chain width mm 82.6
Plate thickness mm 4.0
  1. Small sideflex radius (150mm) provides more fl exibility in the layout of conveyor lines. Ideal for conveyance in tight spaces.
  2. Comb-toothed plates minimize gaps between links. Ideal for conveying unstable containers such as PET bottles and dessert cups.
  3. Curved sections use corner discs, suppressing the occurrence of wear dust and creaking/squealing noises.
  4. Equipped with float-preventive tabs. Keeps the chain securely in position on corner turns and in incline/decline sections, as well as preventing damage (scratches, etc.) to the top surface of the plates on the return way.

×
( Drag to move. )

Plastic modular chain (wide type)

WT0405-W

Pitch mm 4.5
Chain width mm 90 ~ 945
  1. The minimum chain pitch of 4.5mm in Tsubaki's Top Chain line-up enables a simple conveyor design.
  2. It can be used as a transfer unit between conveyors thanks to minimized dead space.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1516-W

Pitch mm 15
Chain width mm 50 ~ 500
  1. Users can select chain width in 50mm units (standard configurations).
  2. Myriad holes on the surface of the chain eliminate any excess lubrication as well as water/oil that remain on the surface.
  3. Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2515F-W

Pitch mm 15
Chain width mm 170 ~ 850
  1. Boxes, cases, and bulk items can be conveyed at an incline.

×
( Drag to move. )

Plastic block chain

RSP-T-CU

Pitch mm 12.7
Chain width mm 20
  1. Straight and curved conveyance is possible, making layout easy.
  2. Chain pitch is 12.7mm, and the minimum bending radius is R300, allowing for space savings.
  3. With attachments to prevent floating.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2525-K

Pitch mm 25.4
Chain width mm 76.2 ~ 1524
  1. Suitable to convey stacked cardboards.
  2. The chain's top surface has a slightly convex shape where stacked heavy sheets slightly slip into, thereby preventing the sheets from slipping.
  3. The backside surface has a rounded shape, which is suitable to wind around the round bar of 50 mm and minimize dead space between the conveyors.
  4. The new plug reduces the force when inserting plug by 60% compared to the previous plug, making it easier to connect and disconnect the chain.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1515F-W

Pitch mm 15
Chain width mm 50 ~ 750
  1. The lineup of flight heights 10mm and 50mm allows selection of flight heights that match the transport conditions
  2. The lineup of indents 0mm and 25mm allows selection of an indent width that matches the conveyance conditions
  3. Prevents chain from floating by adopting float-preventive tab.
  4. Plug-integrated slit pin, which is adopted to 50mm and 100mm width chain, realizes easy maintenance.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1516F-W

Pitch mm 15
Chain width mm 50 ~ 750
  1. The lineup of flight heights 10mm and 50mm allows selection of flight heights that match the transport conditions
  2. The lineup of indents 0mm and 25mm allows selection of an indent width that matches the conveyance conditions
  3. Prevents chain from floating by adopting float-preventive tab.
  4. Plug-integrated slit pin, which is adopted to 50mm and 100mm width chain, realizes easy maintenance.

×
( Drag to move. )

Plastic modular chain (wide type)

WT1515VG-W

Pitch mm 15
Chain width mm 50 ~ 1000
  1. A herringbone-shaped rubber, which was attached to the surface of the chain by double injection molding, prevents conveyed product from slipping off and enables vertical transportation up to 20 degrees inclination.
  2. WT1515VG-W (rubber type) can be transferred conveyed product smoothly to next process, owing to configure in-line layout without using transfer plate between conveyors.
  3. Nose bars make it possible to reduce dead space between conveyors.
  4. Plug-integrated slit pin, which is adopted to 50mm and 100mm width chain, realizes easy maintenance.

×
( Drag to move. )

Plastic modular chain (wide type)

WT0705-W

Pitch mm 7.5
Chain width mm 50 ~ 500
  1. Made of standard materials, with a minimum chain pitch of 7.5mm.
  2. Enables a 19mm dead space between conveyors by using a minimum R3 nose bars.
  3. Ideal for stable conveyance of items that easily deform and small items.
  4. Uses a slit pin integrated with the plug for chains with 50mm and 100mm widths.
  5. Reduces noise by 6.5dB on average compared to chains with a 15mm pitch.

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WT0705-M

Pitch mm 7.5
Chain width mm 30
  1. The first introduced 30mm-width Plastic Modular Chain.
  2. Suitable for compact layout and the replacement from narrow belt.
  3. The nose bar with 3mm radius reduces the dead space between conveyors to 19mm, making it suitable to convey small products.
  4. Slit pin system improves maintainability

×
( Drag to move. )

Plastic modular chain (fixed-width type)

WTM2535G-M

Pitch mm 25.4
Chain width mm 82.6
  1. Low magnetic force reduces the impact on the conveyed products when they leave the chain, which minimizes damage to the products and the chain.
  2. Low magnetic type contributes to smooth traverse of products.
  3. WTM2535G-M adopts slide plugs for preventing pins from falling off on both sides of the chains.
    Pins can be inserted or removed from both sides.This feature contributes to easy maintenance.
  4. WTM2535G-M adopts cylindrical shape of magnet to prevent magnet from flying out when chain wears.

×
( Drag to move. )

Plastic modular chain (wide type)

WTU3015T-K

Pitch mm 30
Chain width mm 228.6 ~ 762.0
  1. Plastic modular chan that allows a variety of curved layout including 90-degree, 180-degree and S-shape.
  2. Adopts a plug which is easy to handle to prevent pins to come out.Easier to maintain compared to wire mesh conveyor and rubber belt conveyor.
  3. Tabs which prevent chains from floating made of Advanced Low Friction/Wear Resistant Series(ALF) reduce the coefficient of dynamic friction with rails.

×
( Drag to move. )

Plastic modular chain (wide type)

WTU3015T-K-SUSP

Pitch mm 30
Chain width mm 228.6 ~ 762.0
  1. Plastic modular chan that allows a variety of curved layout including 90-degree, 180-degree and S-shape.
  2. Adopts a plug which is easy to handle to prevent pins to come out.Easier to maintain compared to wire mesh conveyor and rubber belt conveyor.
  3. Tabs which prevent chains from floating made of Advanced Low Friction/Wear Resistant Series(ALF) reduce the coefficient of dynamic friction with rails.

×
( Drag to move. )

Plastic modular chain (wide type)

WT2525VG-K

Pitch mm 25.4
Chain width mm 76.2 ~ 1143.0
  1. Suitable for vertical transportation due to high friction of the rubber which was attached to the surface by double injection molding.
  2. Possible to shorten dead space between conveyors due to using small rollers of diameter of 50 mm for both ends of the conveyors.
  3. By supporting chain using return rollers or wearstrips at indent section in return way, it is possible to prevent rubber from wearing.
  4. Possible to maintain only with flathead screwdriver due to adopting Pin and Plug system.