Frame support parts Support Head
- Support Head
- Used for fixing pipe to frames, supporting conveyor frames from underneath.
-
Application
The bearing head supports a conveyor frame from underneath.
Use for fixing the pipe frame.
Wiring inside the support head is also possible.
-
Usage image
[Click to enlarge ]
[Click to enlarge ]
Installation on control panels.
[Click to enlarge ]
[Click to enlarge ]
Use as joint parts
[Click to enlarge ]
[Click to enlarge ]
For a list of Frame Support Parts and applicable parts combinations for each pipe, see the applicable parts combination table by pipe size below.
Support Head list
| Model No. | TP-CPSH48 | TP-CPSH60 |
|---|---|---|
| Type | - | |
| Pipe used nominal diameter mm | Φ48.6 | Φ60.5 |
| Pipe outside dia. mm | 1½ | 2 |
| Bolt size | - | |
| shape |  |
|
| Main Body Material | Reinforced polyamide | |
| Base unit appearance color | Black | |
| Bolt/nut/washer material | Stainless Steel | |
| Bolt material | - | |
| Bush material | - | |
| Nut material | - | |
| Foot/bolt/nut material | - | |
| Antiskid rubber pad material | - | |
| Antiskid rubber pad appearance color | - | |
| Equivalent to MB | - | |
| Model No. | TP-C14050T-BH | TP-C14741T-BH | TP-C14739T-BH |
|---|---|---|---|
| Type | Fixed mounting hole type | Adjustable mounting hole type | |
| Pipe used nominal diameter mm | Φ48.6 | Φ60.5 | |
| Pipe outside dia. mm | 1½ | 2 | |
| Bolt size | - | ||
| shape |  |
 |
|
| Main Body Material | Reinforced polyamide | ||
| Base unit appearance color | Black | ||
| Bolt/nut/washer material | Stainless Steel | ||
| Bolt material | - | ||
| Bush material | - | ||
| Nut material | - | ||
| Foot/bolt/nut material | - | ||
| Antiskid rubber pad material | - | ||
| Antiskid rubber pad appearance color | - | ||
| Equivalent to MB | MB198-59161-BH | MB28-63503-BH | MB280-66781-BH |
