Frame support parts Threaded tube end
- Threaded tube end
- Insert into the pipe and use in combination with a Universal Foot as a conveyor frame leg.
-
Application
Insert it into a pipe and combine it with a universal foot to use it as a leg for a conveyor frame.
-
Usage image
[Click to enlarge ]
Threaded tube end Installation Examples
[Click to enlarge ]
For a list of Frame Support Parts and applicable parts combinations for each pipe, see the applicable parts combination table by pipe size below.
Features
Easy mounting
- ・Can be installed simply by hammering into a chamfered pipe.
A safe and easy to use part with no welding required. - ・Stands can even be made quickly using commercially available pipes when needed.
Note) Prepare a pipe with a thickness of 1.65mm.
Compact, low cost
Suitable for supporting with many legs such as multi-line conveyors and for supporting lightweight conveyors. Lower cost than Support Base.
Threaded Tube End list
| Model No. | TP-C14767T-SRB | TP-C14791T-SRB |
|---|---|---|
| Type | - | |
| Pipe used nominal diameter mm | Φ48.6 | Φ60.5 |
| Pipe outside dia. mm | 1½ | 2 |
| Bolt size | - | |
| shape | |
|
| Main Body Material | Reinforced polyamide | |
| Base unit appearance color | Black | |
| Bolt/nut/washer material | - | |
| Bolt material | - | |
| Bush material | Nickel-plated brass | |
| Nut material | - | |
| Foot/bolt/nut material | - | |
| Antiskid rubber pad material | - | |
| Antiskid rubber pad appearance color | - | |
| Equivalent to MB | MB180-63081-SRB | MB180-65154-SRB |
