Power-Lock  TF Series

Product photo
  • Suitable for small hub applications with the small inner-to-outer diameter ratio.
  • ・Designed to fit small hub diameters with the smallest available inner-to-outer diameter ratio of our Power Lock series.
  • ・Minimum number of locking bolts used, enabling reduced installation time.
  • ※With self-centering function. No need for the hassle of machining on hubs for guide portions.
  • ※There is no hub movement when assembling.

Standard package

  • ・Constructed of the following four parts: inner and outer rings, a spacer and locking bolts.
  • ・Many manufacturers are available both domestically and abroad, and this series is highly compatible.
  • Applicable shaft diameter :Φ6~Φ90
  • Torque range :11~8820N・m
  • Applicable tolerance :Shaft :h8 Hub hole :H8
  • Applicable surface roughness :Ra1.6

Electroless nickel plated

  • ・The units are plated with peel-proof electroless nickel.
  • ・The locking bolts have a special surface treatment with lubricating effect, so no additional lubrication is necessary during assembly.
  • ・Dimensions and transmissible torque are the same as the standard TF models. No torque reduction.
  • ・Small inner and outer diameter ratios, available from Φ10, are ideal for small-diameter hubs as in the standard series.
  • Applicable shaft diameter :Φ10~Φ90
  • Torque range :44~8820N・m
  • Applicable tolerance :Shaft :h8 Hub hole :H8
  • Applicable surface roughness :Ra1.6

Construction

構造図

Single taper

構造写真

・"Power-Lock" TF Series shaft-hub locking devices are simply constructed of the following four parts: inner and outer rings, a spacer and locking bolts. Simply tighten these bolts to achieve a completely secure connection.

Handling method

Catalogs ・Instruction Manuals

Model No. examples

PL 010 X 018 TF - KP

Shaft diameter

Outer Diameter

Series

Package
Blank: Standard type
KP:Electroless nickel plated

List of Models