Power-Lock  AD-N Series

Product photo
  • High torque transmission capacity type
  • ・Capable of transmitting 1.5 to 3 times the AS Series rated torque capacity.
  • ※With self-centering function. No need for the hassle of machining on hubs for guide portions.
  • ※There is no hub movement when assembling.
  • ※Careful work is required for assembly and removal. Please refer to the video for details.

Standard package

  • ・Designed with the same inner and outer diameters as the AS Series, you can use fewer units of the AD-N Series to replace AS Series units.
  • ・Only Tsubaki products are available from Φ19. Large capacity torque transmission for small diameter shafts should be left to.
  • Applicable shaft diameter :Φ19~Φ300
  • Torque range :382~429000N・m
  • Applicable tolerance :Shaft :h8 Hub hole :H8
  • Applicable surface roughness :Ra1.6

Electroless nickel plated

  • ・The units are plated with peel-proof electroless nickel.
  • ・The locking bolts have a special surface treatment with lubricating effect, so no additional lubrication is necessary during assembly.
  • ・The dimensions and transmission torque are the same as the AD-N standard specifications. No torque reduction.
  • ・Suitable for applications requiring large capacity torque, such as for fixing bogie wheel shafts in a clean room.
  • Applicable shaft diameter :Φ50~Φ100
  • Torque range :4210~26500N・m
  • Applicable tolerance :Shaft :h8 Hub hole :H8
  • Applicable surface roughness :Ra1.6

Construction

構造図

Double taper

構造写真

・These products come in a complete one-piece unit, so the only removable parts are the locking bolts.
The holes that do not contain bolts when delivered are the tap holes prepared for removal.

Handling method

Catalogs ・Instruction Manuals

Model No. examples

PL 019 X 047 AD-N - KP

Shaft diameter

Outer Diameter

Series

Package
Blank: Standard type
KP:Electroless nickel plated

List of Models