DCBL Hypoid Motor

Product photo
  • This is a DCBL Hypoid Gear Motor with hypoid gearhead for compactness with right-angle shaft.
    Communication functions are equipped for various controls.

  • Despite the name DC brushless motors, these motors are driven by AC power.
    ※Because of their operating principle, they are called DC brushless motors.

  • ※Motor main unit and driver must always be used as a set.

banner

Features

  • ・Excellent speed control

    A Hall IC built into the motor detects rotation speed and provides feedback to the driver to ensure stable operation speed even during load fluctuations.

  • ・High Efficiency

    DCBL Hypoid Motors use permanent magnets in the rotors, there is no need to flow induced current to the stator like induction motors, and there are no sliding part, so that an efficiency equivalent to IE4 is achieved on a single motor level.

    High Efficiency Graph

    High efficiency results in less loss, and the miniaturization of the motor has made the total length of the motor about 38% smaller than that of an induction motor.
    It also makes it possible to eliminate cooling fans, thus increasing environmental resistance.

    High Efficiency Volume

  • ・Tenacious torque

    Combined with Tsubaki's hypoid gear, it maximizes the tenacious torque inherent in a motor that does not step out.

  • ・Wide variable speed range

    Since the motor rotation speed range is 100-2500r/min, a wide range of speed changes from low to high speed is possible, so this single unit can be used for devices that used to change the reduction ratio depending on the rotation speed.

  • ・Built-in temperature sensor prevents burnout

    A temperature sensor is built into the motor to provide burnout protection by constantly monitoring the winding temperature. It can be used safely even in applications that require frequent startup.

  • ・Optimal drive source can be selected according to the application

    As a third option, DCBL Hypoid Motor has been newly added to the range, allowing the user to select the most suitable motor, such as a reducer with three-phase motor or a reducer for servo motors, depending on cost and required accuracy.

    Reducer with DCBL Hypoid Motor Reducer with three-phase motor Gear Reducer for Servo Motors
    Reducer with DCBL Hypoid Motor Reducer with three-phase motor Gear Reducer for Servo Motors

Models

Motor Capacity Reduction ratio
0.2kW 1/10～1/60
0.4kW 1/10～1/50
0.75kW 1/10～1/50

Catalogs ・Instruction Manuals

Model No. examples

DCHM 020 - 22 U 10 S B
｜
｜
｜
｜
｜		 ｜
Motor Capacity 		｜
Frame number 		｜
｜
｜
｜
｜		 ｜
Reduction ratio 		｜
｜
｜
｜
｜		 ｜
Package symbol
020：0.2kW
040：0.4kW
075：0.75kW 		10：1/10 B：With brake
No symbol ：No brake
Series
DCBL Hypoid Motor 		Mounting type
U：Face Mount Type
H：Hollow Shaft Type 		Shaft Arrangement
T：Output shaft is on both sides.
S：Output shafts on one side
No symbol ：Hollow Shaft Type

■ Tsubaki model No. navigation

Selected model No. ：

Display product details

＊Select each item in order from the left to make sure a valid model number is generated.

Series Motor Capacity Frame number Mounting type Reduction ratio Shaft Arrangement Package symbol


20











Series

DCHM：This is a DCBL Hypoid Gear Motor with hypoid gearhead for compactness with right-angle shaft.

Motor Capacity

Capacity of motor.

Frame number

This indicates the size of the gear reducer. For most models, this is the same value as the output shaft diameter.

This is automatically determined by the motor capacity and reduction ratio.

Mounting type

H：The output shaft is hollow.

U：The output shaft is solid, and the unit is designed for face mounting.

Reduction ratio

This indicates the reduction ratio.

Shaft Arrangement

T：The solid output shaft protrudes on both sides.

S：On this type, the mounting code is for face mount (U), and the solid output shaft protrudes on the mounting surface side.

No symbol: leave the shaft arrangement symbol blank if you specify hollow type (H) for the mounting code.

Package symbol

No symbol: Leave the package symbol blank for a reducer with a motor and no brake, or a reducer without a motor but with a double shaft.

B：For a reducer with a motor, add to select a motor with a brake.

Option symbol

・Cable position

　M1：90°Offset 　　M1：180°Offset 　　M1：270°Offset

・Hollow shaft bore diameter

　S1：Φ20　　S2：Φ25　　S3：Φ30

List of Models

※Click the model No. for detailed information. Expand all Collapse all

DCBL Hypoid Motor 　0.2kW　（Model No. DCHM020～）

DCBL Hypoid Motor 　0.4kW　（Model No. DCHM040～）

DCBL Hypoid Motor 　0.75kW　（Model No. DCHM075～）

Options

Shaft cover

・For the hollow shaft type, a cover for the shaft end opposite the mounting end is provided.
　(Material ：Made of polypropylene resin 　Color ：Light silver )


・Size (Unit: mm), PDF drawings


Model No. Motor capacity, reduction ratio PDF drawing Standard Price Delivery
HM70CAP-GRAY DCHM020-20H10～60 PDF Contact us for details. Contact us for details.
HM90CAP-GRAY DCHM040-30H10～50
DCHM075-35H10～50		 PDF Contact us for details. Contact us for details.

Torque Arm

・A torque arm is available for hollow shaft models that are to be shaft mounted. Also fits shafts with an adapter and double output shafts. (Material: SS400)

Mounts in either position, depending on how the gear reducer is mounted.

・Size (Unit: mm), PDF drawings

Model No. Motor capacity, reduction ratio A B C D H L R1 R2 R3 ΦZ1 ΦZ2 Recommended bolts Thickness:
t		 PDF drawing Standard Price Delivery
HM100TA 60W 1/5～1/240
90W 1/5～1/240
0.1kW 1/5～1/120
0.2kW 1/5～1/60		 100 62 38 70 82 126 9 11 37 9 11 M10 4.5 PDF Contact us for details. Contact us for details.
HM150TA 0.1kW 1/160～1/480
0.2kW 1/80～200
0.4kW 1/5～1/50		 150 103 47 88 129 157 11 15 47 11 13 M12 6 PDF Contact us for details. Contact us for details.
HM200TA 0.1kW 1/600～1/1200
0.2kW 1/300～1/480
0.4kW 1/60～1/200
0.75kW 1/5～1/50		 200 142 58 106 171 188 12 17 47 13 17 M16 6 PDF Contact us for details. Contact us for details.