Drawing Library DCBL Hypoid Motor
Series
DCHM：This is a DCBL Hypoid Gear Motor with hypoid gearhead for compactness with right-angle shaft.
Motor Capacity
Capacity of motor.
Frame number
This indicates the size of the gear reducer. For most models, this is the same value as the output shaft diameter.
This is automatically determined by the motor capacity and reduction ratio.
Mounting type
H：The output shaft is hollow.
U：The output shaft is solid, and the unit is designed for face mounting.
Reduction ratio
This indicates the reduction ratio.
Shaft Arrangement
T：The solid output shaft protrudes on both sides.
S：On this type, the mounting code is for face mount (U), and the solid output shaft protrudes on the mounting surface side.
No symbol: leave the shaft arrangement symbol blank if you specify hollow type (H) for the mounting code.
Package symbol
No symbol: Leave the package symbol blank for a reducer with a motor and no brake, or a reducer without a motor but with a double shaft.
B：For a reducer with a motor, add to select a motor with a brake.
Option symbol
・Cable position
M1：90°Offset M1：180°Offset M1：270°Offset
・Hollow shaft bore diameter
S1：Φ20 S2：Φ25 S3：Φ30
