Drawing Library   Reducers

DCBL Driver

Model No. 　DCRD～

Go to Model No. Selection

Tsubaki exclusive DCBL Hypoid Gear Motor Driver.
Speed control, positioning control, torque limit operation and various protection functions are equipped.

  • ・Various controls can be easily achieved by constantly monitoring the operating status of the gear motor with the driver.
  • ・The system supports multiple communication methods, making it easy to integrate it into existing equipment and remotely monitor operating status.
  • ・Motor and driver overheat protection and overload protection are provided, enabling quick stop in the event of an abnormality.
  • ・A simple holding function can be used to control the motor shaft so that it does not rotate when the motor is stopped.

DCBL Hypoid Motor

Model No. 　DCHM～

Go to Model No. Selection

This is a DCBL Hypoid Motor with hypoid gearhead for compactness with right-angle shaft.
Standard models with brakes are also available. Communication functions are equipped for various controls.

  • ・Excellent speed control, less susceptible to load fluctuations and stable rotational speed.
  • ・Permanent magnets are used in the rotor, resulting in low loss and high efficiency (equivalent to IE4).
  • ・Compact yet powerful output compared to induction motors.
  • ・The speed control range is as wide as 1:25, allowing operation from low to high speed ranges.
Size

0.2kW～0.75kW

Reduction ratio

0.2kW：1/10～1/60
0.4kW：1/10～1/50
0.75kW：1/10～1/50

※Click here for a list of all DXF files