Drawing Library Clutches
MZ Series
Model No. MZ~
Can be used in a wide range of applications
- ・Can be used in a wide range of applications from low- to high-speed operations
- ・All models are always in stock for immediate delivery.
- ・Mounting of sprockets, etc. is done with the through hole on the inner periphery of the outer race
- ・Pre-lubricated with grease. No lubrication maintenance required.
- ・Coupling type (MZ-C) is also available.
- ・Suitable for indexing and backstopping.
Range of
Shaft Diameters mm
Φ15~Φ70
Torque range N・m
186~3040
MZ-G Series
Model No. MZ□□G~
Grinding series for outer race periphery of MZ series.
- ・Mounting of sprockets, etc. is done with the through hole on the outer periphery of the outer race
- ・Can be used in a wide range of applications from low- to high-speed operations
- ・All models are always in stock for immediate delivery.
- ・Pre-lubricated with grease.
- ・No lubrication maintenance required.
- ・Suitable for indexing and backstopping.
Range of
Shaft Diameters mm
Φ15~Φ70
Torque range N・m
186~3040
MG Series
Model No. MG~
This is a typical model of overrunning.
- ・Compact design and high torque capacity.
- ・Suitable for medium and low-speed overrunning.
- ・Excellent wear resistance during overrunning.
- ・Coupling type (MG-C) is also available.
Range of
Shaft Diameters mm
Φ19~Φ250
Torque range N・m
314~176000
PB Series
Model No. PB~
With the sleeve outer race, it is easy to mount small outer diameter sprockets, gears, and belt sprockets
- ・Small outer diameter gears, sprockets and belt sprockets can be mounted to the outer race with a key.
- ・Suitable for low to mid-speed applications.
- ・Uses oil-impregnated metal bearings.
- ・All models are always in stock for immediate delivery.
Range of
Shaft Diameters mm
Φ10~Φ45
Torque range N・m
29.4~2110
200 Series
Model No. B~
Shaft-mounted type without an inner race.
- ・Can be compactly embedded in sprockets and gears.
- ・Suitable for low to medium speed applications.
- ・Dedicated inner races are made to order.
Range of
Shaft Diameters mm
Φ25~Φ42
Torque range N・m
39.2~1400
LD Series
Model No. LD~
This is an economical cam clutch that is easy to install and handle.
- ・This is an economical cam clutch that is easy to install and handle.
- ・Pre-lubricated with grease - no additional lubrication required.
- ・All models are always in stock for immediate delivery.
Range of
Shaft Diameters mm
Φ10~Φ30
Torque range N・m
5.88~49
ML Series
Model No. ML~
Compatible with medium loads and easy to install. Allows for a compact design.
- ・Uses a cam and roller structure where rollers serve as a bearing, allowing for a more compact design.
- ・Pre-lubricated with grease. No lubrication maintenance required.
- ・The 2GD type with a dust seal is also available.
This dust-proof type can be used in dusty environments. - ・Shipped together with snap rings for the shafts.
- ・Suitable for low to medium speed applications, and medium loads.
Range of
Shaft Diameters mm
Φ15mm~Φ80mm
Torque range N・m
70~2300
MR Series
Model No. MR~
MR Series Cam Clutch is for outer race overrun.
- ・The MR Series has excellent overrunning wear resistance as the cams lift off and do not contact the inner race when the outer race is overrunning.
- ・This series is intended for applications where the outer race is continuously overrunning at high-speed, so the engagement rotation speed is low.
Range of
Shaft Diameters mm
Φ85~Φ160
Torque range N・m
9500~33800
BB Series
Model No. BB~
Bearing (6200s) with a built-in cam clutch
- ・Compact Design : BB Series functions both as an one-way clutch and a bearing within its compact body, allowing you to use your space more effectively.
- ・Easy mounting : You can choose two ways of mounting to shafts and housings, either press fit or key connection
- ・Increased Torque Capacity : Capable of transmitting larger torque than shell type roller clutches by arranging the number of cams between the inner and outer races.
- ・All models are always in stock. : Depending on the operating conditions the BB Series is also available with an oil seal.
Range of
Shaft Diameters mm
Φ15~Φ40
Torque range N・m
29~260