Drawing Library Small size conveyor chain
- General use small size conveyor chain
- Corrosion Resistant Small Size Conveyor Chain
- Special small size conveyor chain
- Lube free small size conveyor chain
- Integrated Attachment Chains
- Indexing conveyor chain
- Free flow chain
Bearing Bush Chain NB (Standard) Series
Model No. RF2□□□R-NB～
Uses steel needles between pins and bushes. Base chain is steel (plates are nickel plated).
- ・Virtually no chain wear elongation after initial elongation (0.02%) following start of operation.
- ・A wealth of custom configurations is available to meet your needs.
- ・Can use RF Double Pitch Sprockets for R rollers.
- ・Operating Temperature Range ：-10℃～150℃
Size
RF2040～RF2080
Attachment Types
A2, K2
Bearing Bush Chain NBH (High Precision) Series
Model No. RF2□□□R-NBH～
Top surfaces of attachments are ground smooth, and sace between bushes and rollers is smaller.
- ・Virtually no chain wear elongation after initial elongation (0.02%) following start of operation.
- ・Top surfaces of attachments are ground, reducing the amount of deviation in height between adjacent plates.
- ・Pin - bush clearance is half that of Standard Series, minimizing play when engaging the sprocket.
- ・Can use RF Double Pitch Sprockets for R rollers.
- ・Operating Temperature Range ：-10℃～150℃
Size
RF2040～RF2080
Attachment Types
A2, K2
Bearing Bush Chain NBSS (Stainless Steel) Series
Model No. RF2□□□R-NBSS～
All parts except the needles are 18-8SUS(SUS304 equivalent) stainless steel. Bearings are sealed.
- ・Wear elongation is extremely low at just 0.06% after 10 7 cycles.
- ・All parts except the needles are stainless steel. Bearings are sealed to allow use in contact with water.
- ・A wealth of custom configurations is available to meet your needs.
- ・Operating Temperature Range ：-10℃～60℃
- ・Can use RF Double Pitch Sprockets for R rollers.
Size
RF2040～RF2080
Attachment Types
A2, K2
Bearing Cage Chains
Model No. RF2□□□R-NC～
Uses a needle bearing cage (of engineering plastic) between the pin and bush.
- ・Will not elongate further after slight initial elongation (0.03%) during first use.
- ・The base chain is steel. More affordable than NB bearing bush chain.
- ・Operating Temperature Range ：-10℃～60℃
- ・Can use RF Double Pitch Sprockets for R rollers.
Size
RF2040～RF2080
Attachment Types
A2, K2
Indexing Table Chain
Model No. BC□□□D/S□□～
Uses needle bearings in the bearing portion, and use steel bearing for outboard rollers and guide rollers.
- ・Virtually no chain wear elongation after initial elongation (0.01%) following start of operation.
- ・A chain pitch accuracy of ±0.05mm allows for high precision positioning.
- ・The base chain is steel with a black oxide coating.
- ・Operating Temperature Range ：-10℃～60℃
- ・Requires an indexing table chain sprocket.
Size
BC050～BC150
Mini Tact Chain
Model No. BCM12.5-9, BCM15-9
Uses steel needle bearings in the bearings.
- ・Virtually no chain wear elongation after initial elongation (0.01%) following start of operation.
- ・Chain pitch accuracy is ±0.05mm, and chain pitch is small, making it perfect for high precision positioning of small work.
- ・Uses lightweight aluminum for the inner block, enabling compact drives and designs.
- ・Operating Temperature Range ：10℃～40℃
- ・Requires a sprocket for Mini Tact Chains.
Size
BCM12.5-9,BCM15-9
Attachment Types
Please contact Tsubaki representatives.
