Drawing Library   Hypoid Motor Mini Series

Selected model No.:

* Select each item in order from the left to make sure a valid model number is generated.

Series Motor Specifications Motor Capacity Mounting type Reduction ratio Shaft Arrangement Brake Package symbol
HMM



























Motor Specifications

T: 3-phase power supply.

S: Single-phase power supply.

Motor Capacity

This indicates the motor capacity.

Mounting type

H: The output shaft is hollow.

U: The output shaft is solid, and the unit is designed for face mounting.

L: The output shaft is solid, and the unit is designed for foot mounting.

Reduction ratio

This indicates the reduction ratio.

Shaft Arrangement

L: On this type, the mounting code is for feet mounts (L), and the solid output shaft protrudes to the left side.

R: On this type, the mounting code is for feet mounts (L), and the solid output shaft protrudes to the right side.

T: The solid output shaft protrudes on both sides.

S: On this type, the mounting code is for face mount (U), and the solid output shaft protrudes on the mounting surface side.

No symbol: leave the shaft arrangement symbol blank if you specify hollow type (H) for the mounting code.

Brake

No symbol: the motor will not have a brake.

B: This specifies a motor with a brake.

Package symbol

W: This specifies a motor suitable for outdoor installation.

J: This specifies a motor suitable for installation in areas subject to water.

V: This specifies the power supply voltage will be doubled.

   For 3-phase power: 400/400/440 VAC at 50/60/60 Hz.

   This specifies 200 VAC at 50/60 Hz for single-phase power.

WV: This specifies the outdoor package and double voltage.

P: This specifies a plastic terminal box.

PV: This specifies a plastic terminal box and double voltage.

N2: This specifies compliance with UL standards.

N3: This specifies CCC compliance.