Drawing Library Hypoid Motor Mini Series
Motor Specifications
T：3-phase power supply.
S：Single-phase power supply.
Motor Capacity
This indicates the motor capacity.
Mounting type
H：The output shaft is hollow.
U：The output shaft is solid, and the unit is designed for face mounting.
L：The output shaft is solid, and the unit is designed for foot mounting.
Reduction ratio
This indicates the reduction ratio.
Shaft Arrangement
L：On this type, the mounting code is for feet mounts (L), and the solid output shaft protrudes to the left side.
R：On this type, the mounting code is for feet mounts (L), and the solid output shaft protrudes to the right side.
T：The solid output shaft protrudes on both sides.
S：On this type, the mounting code is for face mount (U), and the solid output shaft protrudes on the mounting surface side.
No symbol: leave the shaft arrangement symbol blank if you specify hollow type (H) for the mounting code.
Brake
No symbol: the motor will not have a brake.
B：This specifies a motor with a brake.
Package symbol
W：This specifies a motor suitable for outdoor installation.
J：This specifies a motor suitable for installation in areas subject to water.
V：This specifies the power supply voltage will be doubled.
For 3-phase power: 400/400/440 VAC at 50/60/60 Hz.
This specifies 200 VAC at 50/60 Hz for single-phase power.
WV：This specifies the outdoor package and double voltage.
P：This specifies a plastic terminal box.
PV：This specifies a plastic terminal box and double voltage.
N2：This specifies compliance with UL standards.
N3：This specifies CCC compliance.
