Drawing Library Sprocket / Pin gear drive
- Drive sprocket
- Sprockets for Small Size Conveyor Chains
- Sprockets for Large Size Conveyor Chains
- Pin gear drive
Fit Bore Sprockets have finished bores.
- ・The bore and keyway have been finished, and the sprocket comes with two set screws.
They can be used as is with no additional troublesome finishing. - ・Tsubaki offers three types of sprockets: in-stock, short delivery and MTO products.
Stock item :Specific type of finishing.
Short delivery / MTO products :Can be freely selected from set finishings.
Size
Finished Bore Type :RS35~RS100
Short delivery / MTO products
Single-strand type :RS35~RS240
RF06B~16B
Double-strand type :RS40~RS120
RS08B~16B
SD type :RS40~RS80
Stainless Single-strand type :RS35~RS80
Fit bore BR type is a product with finished bore for mounting bearings.
- ・Sprocket with finished bore. (Bearings not included )
- No additional troublesome finishing is required when installing bearings.
Size
Made to order
Single-strand B type
RS35~RS160
Sprockets with a keyless locking device.
Frictional force on the tapered sleeve enables sprockets to lock to the shaft with no keys. Phase alignment is also easy.
- *S Type :Strong locking with bolts, and a wide variety of shaft diameters available
- *N Type :Easy locking with nuts, mainly in smaller diameters
Size
S Type :
RS35~RS100
N Type :
RS35~RS60
Bearing units with hubs provide stable rotation.
- ・We offer a wide variety of idler sprockets to choose from.
Can be used as an idler of CT-TH Type Chain Tensioners.- *ball bearing type and oilless bush type