Drawing Library Electrical controllers
Shock Monitor TSM4000 Series
Model No. TSM4000～
Upgraded Shock Monitor capable of quick detection of minute load fluctuations
- ・The terminal block has a safe design with a cover.
- ・Equipped with analog output 0-10V as standard
- ・With the backlight auto-off function, helps you with energy-saving operations.
- ・Standardized panel-mounted type. Easy terminal wiring at the time of panel installation.
- ・Remote monitoring is possible by combining a touch-screen display and the Shock Monitor.
Type
Basic model
Shock Monitor TSM4000H1 Series
Model No. TSM4000H1～
For general industry machines. Economical Type.
- ・Fewer functions compared to the basic type make this type economical and easy to set.
- ・The relay output has two outputs and can be used as an alarm output (High 1) and an abnormal output (High 2).
- ・As a set, High 1 and High 2 can be switched from the external for a maximum of 4 types.
It is useful to change settings depending on the workpiece used for conveyor transportation. - ・It comes with an efficient torque monitoring function (20-120Hz) when using the inverter.
Type
Economical type
Shock Monitor TSM4000H2 Series
Model No. TSM4000H2～
For general industry machines. Load-following type
- ・Type in which the load setting value automatically changes and follows according to the fluctuating load.
- ・The writing cycle can be changed depending on the fluctuations of the efficiency change.
- ・Absolute value monitoring can be done by High 2, in which the operational levels do not change.
Type
Load following type
Shock Monitor TSM4000M1 Series
Model No. TSM4000M1～
For machine tools. Contact detection type
- ・Load ratio at no-load operation can be automatically, or by external input, offset to 0%. Quickly and reliably detects minimal load changes. (There are two types of output: OUT1 and OUT2)
- ・OUT3 is a non-offset value and the absolute value can be monitored.
- ・Detection level can be switched from the external for a maximum of 8 types. Compatible with the change of grinding stone and workpieces.
Type
Contact detection type
Shock Monitor TSM4000M2 Series
Model No. TSM4000M2～
For machine tools. Integral power type
- ・Detects overload and tool wear by integrating one cycle of power from the manufacturing process.
- ・The wear is detected by the upper limit (OUT2), and the drill breakage can be detected by the lower limit (OUT1).
- ・With the instantaneous value of OUT3, overload due to jams is monitored with the absolute value.
- ・Detection level can be switched from the external for a maximum of 8 types. Compatible with the change of grinding stone and workpieces.
- ・The integral time setting can be changed easily.
Type
Integrated power type
Shock Monitor TSM4000M3 Series
Model No. TSM4000M3～
For continuous processing tool Processing tool breakage detection type
- ・Power sensor for machining machines that instantly detects tool breakage.
Detects breakage of machining tool in 0.05 seconds - ・Double safety function of counter and wear detection
The counter function manages the life of parts, and wear detection catches tool wear. - ・Built-in PLCs enable remote catching of tool breakage and support for IoT.
Type
Processing tool breakage detection type
Shock Monitor TSM4000C1 Series
Model No. TSM4000C1～
For crushers. Built-in forward/reverse sequencer type
- ・Just by inputting starting signal, stopping, reverse movement and restarting during overload can be controlled without an external sequence program.
- ・In case the machine does not return to normal operation even after the preset reverse setting time has passed, the stopping signal is output to stop the device completely.
- ・The overload level, stop time, and reverse running time can be set easily on site.
- ・For energy saving, automatic stoppage available under no load.
Type
Built-in forward/reverse sequencer type
