Drawing Library   CROISE MOTOR

Selected model No.:

※ Small-Size Gear Motor  Model numbers will change from November 1, 2016.

* Select each item in order from the left to make sure a valid model number is generated.

Series Motor Capacity Frame No. Mounting direction symbols Mounting type Reduction ratio Shaft Arrangement Package symbol Option symbol A Option symbol B [Old:Supplement code]










13

0






10~60




















































Series

CSMA, CSME:Single stage reduction using a worm gear.

HCMA, HCME:Two stage reduction using a helical gear and worm gear.

Motor Capacity

This indicates the motor capacity.

Frame No.

This indicates the size of the gear reducer.

This is automatically determined by the motor capacity and reduction ratio.

Mounting direction symbols

Specify the mounting direction.

( The mounting code is fixed to No. 0 for frame sizes 28 and below, and to No. 1 for frame sizes 32 and above.

  Contact us for information about other symbols. )

Mounting type

H: The output shaft is hollow.

U: The output shaft is solid, and the unit is designed for face mounting.

L: The output shaft is solid, and the unit is designed for foot mounting.

Reduction ratio

This indicates the reduction ratio.

The range is separated into sections that correspond to the frame number.

Shaft Arrangement

L: The solid output shaft protrudes to the left side looking from the motor.

R: The solid output shaft protrudes to the right side looking from the motor.

T: The solid output shaft protrudes on both sides.

No symbol: leave the shaft arrangement symbol blank if you specify hollow type (H) for the mounting code.

Package symbol

No symbol: Leave the package symbol blank if the motor does not have a brake.

B: Specify to order a motor with a brake.

BE: A rotary encoder will be mounted to the rear of the motor. This specifies a motor with a brake.

SR: This specifies a motor with a Shock Relay, an electronic overload protection device.

Option symbol A

LG: This adds a mechanical overload protection device. The mounting surface will be on the left side.

RG: This adds a mechanical overload protection device. The mounting surface will be on the right side.

Z: This specifies a motor that can be used with a variable frequency drive.

W: This specifies a motor suitable for outdoor installation.

J: This specifies a motor suitable for installation in areas subject to water.

V: This specifies a power supply voltage and cycle rating of 400/400/440 VAC, and 50/60/60 Hz.

V1: This specifies a power supply voltage and cycle rating of 380VAC, and 50Hz.

V2: This specifies a power supply voltage and cycle rating of 380VAC, and 60Hz.

V3: This specifies a power supply voltage and cycle rating of 415VAC, and 50Hz.

V4: This specifies a power supply voltage and cycle rating of 460VAC, and 60Hz.

N: This specifies compliance with the CE marking directives.

N2: This specifies compliance with UL standards.

*N3: This specifies CCC compliance.

H: This specifies an aluminum terminal box.

Q: The brake can be manually disengaged.

M: The motor can be turned manually from the fan side.

Option symbol B [Old:Supplement code]

・ Terminal box position

  The terminal box will be relocated to a position counterclockwise looking from the motor.

  P1:90゚ Offset   P2:180゚ Offset   P3:270゚ Offset

・ Direction of terminal box wiring outlet.

  The wiring outlet on the terminal box will be relocated to a position clockwise looking at the terminal box.

 ・CSMA, HCMA  For motor capacities of 0.75 kW or less.
  D1:90゚ Offset   D2:180゚ Offset   D3:270゚ Offset

 ・CSMA, HCMA  For motor capacities of 1.5 kW or more.
  E1:90゚ Offset   E2:180゚ Offset   E3:270゚ Offset

 ・For the CSME, HCME
  F1:90゚ Offset   F2:180゚ Offset   F3:270゚ Offset

・ Paint Color

 C0: Light gray   C1: Light silver metallic

 C2: Ivory white   C3: Dark silver metallic