Drawing Library   Large size conveyor chain

Sediment Collector Chain  ACRType・ACPType・ACSType

Model No.  ACP04152/P~, ACR8□□~, ACS□□□□□~

Go to Model No. Selection

Sediment Collector Chain used at setting basin of water treatment plants.

  • ・ACP Type :
    Used together with a plastic sprocket ACP Series provides superior wear and corrosion resistance. Plastic chains are also lighter than steel chains -- lower power requirements means lower costs.
  • ・ACR Type :
    Rolling contact is made possible through waste treatment chains with rollers and tooth block sprockets, which gives ACR Series better wear resistance. This lighter chain also results in cost savings by reducing necessary drive power.
  • ・ACS Type :
    This chain was a first to use tempered stainless steel for increased wear and corrosion resistance.
    As this is a bushed chain, there are no rollers. Can also be manufactured with stainless steel 300 series.
    (Please contact us. )
Size

ACP04152,
ACR810~ACR819
ACS13~ACS35

Attachment Types

SF4 etc.

Roller type

ACR:
 S-roller
ACP, ACS:
 Bushed type chain

Water Screen Chain  JAC Type

Model No.  JAC□□□□□~

Go to Model No. Selection

Chain used in water screen machines at water treatment plants

  • Right combination of material can give you a right chain for any application.
  • ・NVJ:
    Most economical, highly durable and wear resistant chain.
  • ・PJ(PJH):
    Offers superb wear and corrosion resistance.
  • ・PJW(PJWH):
    PJ Series chain with alternating flanges, preventing chain from falling off of guide rail.
  • ・SJ:
    Our most corrosion resistant chain.
  • ・SJW:
    SJ Series chain with alternating flanges, preventing chain from falling off of guide rail.
  • ・NSJ:
    Wear resistance between bush and roller is 1.5 times higher than SJ specification. NETIS registered(Registration number:KT-230284-A)
  • ・NSJW:
    Wear resistance between bush and roller is 1.5 times higher than SJW specification. NETIS registered(Registration number:KT-230284-A)
  • ・FP-SJW:
    Reduced running noise thanks to engineering plastic F rollers.
    ※PJH and PJWH are heavy duty versions of PJ and PJW, respectively, and have a wider inner plate for more strength.
Chain Series

NVJ Series , PJ Series , PJW Series , SJ Series , SJW Series , NSJ Series, NSJW Series, FP-SJW Series

Size

JAC08tons~JAC26tons
JAC6205

Attachment Types

Y, A2

Roller type

R-roller , F-roller ,
S-roller ,FP-roller

For Water Screens  WAC Type

Model No.  WAC□□610~

Go to Model No. Selection

Used on automatic water screens such as those found in water intakes at thermal power plants.

  • ・Pins, bushes, and rollers use tempered SUS400 series stainless steel, giving them corrosion and wear resistance necessary for reciprocating operation between in and out of seawater.
  • ・Special plastic is used for a roller inner diameter as a bearing material, and seawater is used as a substitute for lubricant (no grease is required), so maintenance is easy.
Size

WAC25610~WAC120610

Attachment Types

None

Roller type

R-roller

Conveyor Chain for Water Treatment Plants  BF Type

Model No.  BF□□□~, ACS4124~

Go to Model No. Selection

This drive chain uses tempered stainless steel for increased wear and corrosion resistance.

  • ・SUS300 series stainless steel also available.
  • ・Roller chain sprockets can be used as is.
  • ・Bushed type chain.
Size

BF120~BF240
ACS4124, BF2120

Go to Model No. Selection

Drive chain with rollers made of tempered SUS400 series stainless steel for water treatment machines.

  • ・Rolling contact with sprockets increases wear resistance.
Size

ACRD08~ACRD17

Go to Model No. Selection

This plastic drive chain for collectors combines engineering plastic and SUS300 series pins.

  • ・Bushed type chain.
Size

EPC78D, EPC90D

Click here for a list of all CAD files.