Drawing Library Clutches
BS Series
Model No. BS～
Exclusively used in backstop applications for conveyors (low speed)
- ・BS Series uses a cam and roller structure.
- ・Shuts out fine dust with its superior dust-proof construction.
- ・High reliability through the use of specially developed cams.
- ・For sizes BS30 to BS135, the Cam Clutches are prelubricated with grease, eliminating the need for lubrication.
- ・Low-speed overrunning type to be mounted on the end rotating shafts of conveyors and pump.
Range of
Shaft Diameters mm
Φ30～Φ450
Torque range N・m
294～686000
BSEU Series
Model No. BSEU～
Integral torque arm on the outer race
- ・Low-speed overrunning applications
- ・Fitted with high performance V-ring seals.
- ・Self- lubricating cam/roller mechanism for longer life.
- ・2GD Series is fitted with a lip seal and outer cover for enhanced dust and spray protection
Range of
Shaft Diameters mm
Φ20～Φ90
Torque range N・m
216～4700
MG-R Series
Model No. MG□□R～
Intended for use in backstop applications for conveyors (medium speed).
- ・For ease of maintenance, an oil reservoir is attached to the MG Series Cam Clutch.
- ・Used for medium-speed overrunning applications and can be mounted on the middle shafts of reducers.
Range of
Shaft Diameters mm
Φ19～Φ250
Torque range N・m
314～176000
BR & BR-P Series
Model No. BR～ BR□□P～
Longer service life can be expected as the cams do not contact the inner and outer races during high-speed rotating operations.
- ・Longer service life can be expected as the cams do not contact the inner and outer races during high-speed rotating operations. This Cam Clutch is used for high-speed overrunning applications.
- ・Used in high-speed rotation, low-speed engagement, and backstop applications.
- ・The BR type is a motor shaft-mounted type.
- ・The BR-P type has a bearing built in and can be used as is.
Range of
Shaft Diameters mm
Φ20～Φ240
Torque range N・m
306～62034
BREU Series
Model No. BREU～
High speed centrifugal lift off Cam Clutch
- ・Longer service life can be expected as the cams do not contact the inner and outer races during high-speed rotating operations.
- ・Mainly used as backstop of inner race high-speed over running
- ・Available as a base model BREU,with an outer keyway BREU(K) or with a chain coupling attached BREU-C.
- ・Available with a range of different modular flanges
Range of
Shaft Diameters mm
Φ30～Φ150
Torque range N・m
607～33908
MA Series
Model No. MA～
Uses cams that can respond to shock loads.
- ・The cam with excellent impact resistance is used to firmly receive the shock load.
- ・Developed mainly for applications to prevent the arms of pitching machines and tennis machines from moving.
- ・No lubrication maintenance required.
- ・All models are always in stock for immediate delivery.
Range of
Shaft Diameters mm
Φ20～Φ30
Torque range N・m
176～510
BS-F Series
Model No. BS□□□F～
New design for tough environment, high torque, long life, compact and drop in structure
- ・Special double lip oil seal and multi temperature grease for wide temperature range
- ・Ingenious backstop mechanism
- ・The narrowest width with I-beam structure makes easy installation for customer's current layout
- ・Down sizing and High speed
Range of
Shaft Diameters mm
Φ60～Φ465
Torque range N・m
6760～980000
BR-HT Series
Model No. BR□□□HT～
BR-HT Cam Clutch is High Torque version of existing BR series.
- ・BR-HT Cam Clutch is High Torque version of existing BR series.
- ・Backstop applications for high-speed overrunning
- ・Greatly Increased Service Life
- ・Lift Off design, Non rollover design, Lower speed lift-off
- ・A more economical design
Range of
Shaft Diameters mm
Φ20～Φ320
Torque range N・m
105～366000
