Drawing Library Sprocket / Pin gear drive
- Drive sprocket
- Sprockets for Small Size Conveyor Chains
- Sprockets for Large Size Conveyor Chains
- Pin gear drive
RS Sprockets are optimal for RS Roller Chain.
Choose from a wide range of lineups according to your application.
- ＊Steel type ：
General use type. Hardened teeth specification with improved wear resistance is also available. -
＊Stainless steel type ：
Mainly used with stainless steel chain.
Note )Use surface-treated sprockets for coating chains. - ＊Engineering Plastic Type ：
Made of nylon-based plastic for lubrication-free operation. Suitable for light load applications.
Size
Steel type ：
RS15～RS240
RF06B～RS16B
Stainless steel type ：
RS11
RS25～RS80
Engineering Plastic Type ：
RS35～RS60
Fit Bore Sprockets have finished bores.
- ・The bore and keyway have been finished, and the sprocket comes with two set screws.
They can be used as is with no additional troublesome finishing. - ・Tsubaki offers three types of sprockets: in-stock, short delivery and MTO products.
Stock item ：Specific type of finishing.
Short delivery / MTO products ：Can be freely selected from set finishings.
Size
Finished Bore Type ：RS35～RS100
Short delivery / MTO products
Single-strand type ：RS35～RS240
RF06B～16B
Double-strand type ：RS40～RS120
RS08B～16B
SD type ：RS40～RS80
Stainless Single-strand type ：RS35～RS80
Fit bore BR type is a product with finished bore for mounting bearings.
- ・Sprocket with finished bore. (Bearings not included )
- No additional troublesome finishing is required when installing bearings.
Size
Made to order
Single-strand B type
RS35～RS160
Sprockets with a keyless locking device.
Frictional force on the tapered sleeve enables sprockets to lock to the shaft with no keys. Phase alignment is also easy.
- ＊S Type ：Strong locking with bolts, and a wide variety of shaft diameters available
- ＊N Type ：Easy locking with nuts, mainly in smaller diameters
Size
S Type ：
RS35～RS100
N Type ：
RS35～RS60
Bearing units with hubs provide stable rotation.
- ・We offer a wide variety of idler sprockets to choose from.
Can be used as an idler of CT-TH Type Chain Tensioners.- ＊ball bearing type and oilless bush type
