Power-Lock AE Series
- Type with flange and self-centering function that has the same inner and outer diameters as the AS series.
- ・This Series has the same inner and outer diameters as AS Series, and is suitable when a centering guide part is not provided.
- ※With self-centering function. No need for the hassle of machining on hubs for guide portions.
- ※There is no hub movement when assembling.
- ※In the case of step shaft installation, make sure the space between the hub and the steps is greater than 1 mm.
Standard package
- ・Simply constructed with only an inner and an outer ring and a few locking bolts.
- ・Many manufacturers are available both domestically and abroad, and this series is highly compatible.
- Applicable shaft diameter ：Φ19～Φ150
- Torque range ：265～27000N・m
- Applicable tolerance ：Shaft ：h8 Hub hole ：H8
- Applicable surface roughness ：Ra1.6
Construction
Single taper
・"Power-Lock" AE Series shafthub locking devices are simply constructed of the following three parts: inner and outer rings and a few locking bolts. Simply tighten these bolts to achieve a completely secure connection.
Handling method
Catalogs ・Instruction Manuals
Model No. examples
| PL | 019 | X | 047 | AE |
| ｜ Shaft diameter |
｜ Outer Diameter |
｜ Series |
List of Models
※Click the name for more information.
| Standard package |
|---|
| PL019X047AE |
| PL020X047AE |
| PL022X047AE |
| PL024X050AE |
| PL025X050AE |
| PL028X055AE |
| PL030X055AE |
| PL032X060AE |
| PL035X060AE |
| PL038X065AE |
| Standard package |
|---|
| PL040X065AE |
| PL042X075AE |
| PL045X075AE |
| PL048X080AE |
| PL050X080AE |
| PL055X085AE |
| PL060X090AE |
| PL065X095AE |
| PL070X110AE |
| PL075X115AE |
| Standard package |
|---|
| PL080X120AE |
| PL085X125AE |
| PL090X130AE |
| PL095X135AE |
| PL100X145AE |
| PL110X155AE |
| PL120X165AE |
| PL130X180AE |
| PL140X190AE |
| PL150X200AE |
