Small size conveyor chain
Small size conveyor chains are roller chains or double pitch chains with added attachments for small conveying applications.
Attachments are available in a wide range of variations and can be fitted with further slats, bars and special jigs to convey any shape of material.
Engagement drive makes it no slippage and has a wide operating range to conveyor length, conveying direction and ambient conditions.
What's New / Product Information
Features and Points of Caution regarding Chain Conveyors
- ・Can convey items of almost any shape.
- ・A wide array of options available in terms of conveyor length, direction of conveyance, and ambient conditions.
- ・No slippage, allowing for accurate conveyance.
- ・Extremely durable and highly efficient.
【Points of Caution 】
- *While one positive point for chain conveyors is that there is no slippage, care needs to be taken during selection in applications with impacts.
- *Since it is a engagement mechanism between the chain and the sprocket, there is a speed fluctuation due to its characteristics.
Small Size Conveyor Chain Types and Structure
Double Pitch Chains
- ・Has double the pitch of RS Attachment Chain with a flat plate contour.
- ・Can use R or S rollers, allowing for use in various applications.
- ・Double Pitch type sprocket or RS sprocket (when the number of teeth is 30 or more with S roller) can be used.
- ・Suitable for relatively long distance and low speed conveyance.
RS Attachment Chains
- ・This chain has an attachment attached to RS Roller Chain (for drive).
- ・Since the chain pitch is small, small articles can be conveyed at a small pitch, which is generally suitable for short distance conveyance.
- ・High-speed, smooth, and quiet operation is possible.
- ・In most cases, RS sprockets can be used.
See more about components and their roles
1.Plate | 2.Pin | ||
---|---|---|---|
The plate bears the tension placed on the chain. Because the accuracy of the holes into which pins or bushes are press fitted affects chain quality, plates are manufactured with particular precision and finished into tough plates with high fatigue strength and impact resistance. | The two ends of the pin are press fitted to holes in the outer plates and riveted in place. (For Hollow Pin Chain and Poly Steel Chain, they are press fitted only.) Because the pins are subject to shearing and bending forces via the plates, and because the bushes rotate and slide along the pins as the chain articulates, they are manufactured with an emphasis on strength and wear resistance. | ||
3.Bush | 4.Roller | ||
The two ends of the bushes are press fitted to the inner plate and function as bearings for the pins and rollers. They are subject to complex forces through the various parts, and are finished to specifications having high wear resistance. | Rollers are slip fit onto the bushes and reduce mechanical shock when the chain engages the sprocket. In addition, they serve to reduce running resistance by turning when the chain is in motion, making the chain run smoothly. Wear resistance is important. | ||
5.Attachments | 6.Spring Clip/Cotter Pin | ||
Bolt holes are drilled for attachments. For details, see page of Standard Attachments. | Spring clips and cotter pins prevent the connecting plates from detaching and are important components to maintain the intrinsic strength of the chain. Always install these parts. | ||
7.Inner link | 8.Outer link | ||
The ends of the two bushes are press fitted to the inner plate to form the inner link. Rollers are slip fit over the outside of the bushes. | The ends of the two pins are press fitted to the outer plates. The ends of the pins other than those on connecting links are riveted in place to prevent detachment. (For Hollow Pin Chain and Poly Steel Chain, they are press fitted only.) |
Three basic dimensions | Slip fit | Press fit | ||
---|---|---|---|---|
The pitch, roller diameter, and inner width of the inner link are referred to as the three basic dimensions of roller chain. When these dimensions are identical, a roller chain and sprocket are dimensionally compatible. | This will always fit with a clearance when the shafts and holes are fitted together. The hole tolerance range is larger than that of the shaft (pin or bush). | With this type of fit there is continuous interference when the shafts and holes are fitted together. The hole tolerance range is completely under the shaft (pin or bush) tolerance range. |
See more about standard attachment types
Attachment Types
A attachments
This attachment has holes and is attached on one side of the chain.
A1:1 hole A2:2 holes (※Only one hole available for RS Chain. )
SA attachments
This vertical attachment has holes and is attached on one side of the chain.
SA1:1 hole SA2:2 holes (※Only one hole available for RS Chain. )
K attachments
This attachment has holes and is attached on both sides of the chain.
K1:1 hole K2:2 holes (※Only one hole available for RS Chain. )
SK attachments
This vertical attachment has holes and is attached on both sides of the chain.
SK1:1 hole SK2:2 holes (※Only one hole available for RS Chain. )
AA attachments
This attachment has holes on both the top and bottom of the chain, and is attached on one side.
AA1:1 hole AA2:2 holes (※Only one hole available for RS Chain. )
WA attachments
This wide attachment has holes and is attached on one side of the chain.
WA1:1 hole WA2:2 holes
KK attachments
This attachment has holes on both the top and bottom of the chain, and is attached on both sides.
KK1:1 hole KK2:2 holes (※Only one hole available for RS Chain. )
WK Attachments
This wide attachment has holes and is attached on both sides of the chain.
WK1: 1 hole WK2:2 holes
EP attachments
One end of the pins is extended on one side of the chain.
[Photo :EP attachments spaced every link ]GNK attachments
Chain with holes in the plates on both sides. (Available only for S rollers on Double Pitch Chains.)
[Photo :GNK1 attachments spaced every link ]Note )WA, WK:WA and WK attachments cannot be attached to every link of RS Chain.
Formation
While attachments can be spaced more than every link, when attaching to an even number of links we will attach them to outer links where maintenance is easier.
Special Attachment Chain
Tsubaki offers a complete line-up of attachments to match any need.
Small Size Conveyor Chain Product Line-up
- General use small size conveyor chain
- Corrosion Resistant Small Size Conveyor Chain
- Special small size conveyor chain
- Lube free small size conveyor chain
- Integrated Attachment Chains
- Indexing conveyor chain
- Free flow chain
Lineup of hollow pin type chains and curved chains with attachments
Lineup of Double-pitch and RS chains with attachments, such as a hollow pin type chain mounting various attachment using holes in double-pitch pins, and a curved chain with attachment that enables curved conveyance.Hollow Pin Double Pitch Chains
Model No. RF2□□□S/R-HP~
A Double Pitch Chain, featuring pins with holes through them for mounting various attachments for conveyance.
- ・Regardless of whether the chain is straight or wrapped around a sprocket, the center distance between the attachment is always the same.
- ・Attachment load is distributed equally to link plates on both sides of the chain. This provides strength advantages and makes the chain less likely to meander while running.
- ・It is easy to replace attachments, do maintenance, or adjust attachment spacing even while the chain is installed on the equipment.
- ・Available in Standard Series, Lambda Series (lube-free), SS (stainless steel) Series, and NP (nickel plated) Series
- ・Operating Temperature Range (Standard Series ):-10℃~150℃
Size
RF2040~RF2080
Attachment Types
Attachment is special.
Hollow Pin RS Chains
Model No. RS□□-HP~
RS Chain, featuring pins with holes through them for mounting various attachments for conveyance.
- ・Regardless of whether the chain is straight or wrapped around a sprocket, the center distance between the attachment is always the same.
- ・Attachment load is distributed equally to link plates on both sides of the chain. This provides strength advantages and makes the chain less likely to meander while running.
- ・It is easy to replace attachments, do maintenance, or adjust attachment spacing even while the chain is installed on the equipment.
- ・Available in Standard Series, Lambda Series (lube-free), SS (stainless steel) Series, and NP (nickel plated) Series
- ・Operating Temperature Range (Standard Series ):-10℃~150℃
Size
RS40~RS80
Attachment Types
Attachment is special.
Curved Double Pitch Chains with attachment
Model No. RF2□□□S/R-CU~
Double Pitch Chain with a wide clearance between pins and bushes that allows for curved conveyance when used with a chain guide.
※Contact a Tsubaki representative regarding stainless steel and Lambda (lube-free) options as well.
Size
RF2040~RF2080
Attachment Types
Contact us for details.
Curved RS Attachment Chains
Model No. RS□□-CU~
RS Chain with a wide clearance between pins and bushes that allows for curved conveyance when used with a chain guide.
※Contact a Tsubaki representative regarding stainless steel and Lambda (lube-free) options as well.
Size
RS40~RS80
Attachment Types
Contact us for details.