Cam Clutch BS,BS-HS Series

Features

  • This series is exclusively used as a backstopping clutch for conveyors. (For low-speed operation)
  • Grease is sealed in, so lubrication maintenance is not required. (Small size models)
  • Constructed with a two-layer dust protection design.

Suitable Applications

  • For low-speed overrunning applications.
  • Low-speed overrunning type to be mounted on the end rotating shafts of conveyors and pumps.
  • Torque :294~686000N・m{30~70000kgf・m}

List of Model Numbers

※ Click the model No. for detailed information. Expand all Collapse all


BS Series

BS85 - 85 J

Model No.


Keyways: indicates a normal grade keyway by new JIS standards. Add an 'E' to specify the old JIS standard grade 2 keyway.
Shaft Bore Diameter :φ85
New JIS standard key (JIS B1301-1996) Package
BS30-30J
BS50-45J
BS50-50J
BS65-40J
BS65-45J
BS65-50J
BS65-55J
BS65-60J
BS65-65J
BS75-60J
BS75-65J
BS75-70J
BS75-75J
BS85-70J
BS85-75J
BS85-80J
BS85-85J
BS95-80J
BS95-85J
BS95-90J
BS95-95J
BS110-85J
BS110-95J
BS110-100J
BS110-105J
BS110-110J
BS135-___J (※『_』:90~135)
BS160-___J (※『_』:100~160)
BS200-___J (※『_』:100~200)
BS220-___J (※『_』:150~220)
BS250-___J (※『_』:175~250)
BS270-___J (※『_』:200~270)
BS300-___J (※『_』:230~300)
BS335-___J (※『_』:250~335)
BS350-___J (※『_』:250~350)
BS425-___J (※『_』:325~425)
BS450-___J (※『_』:350~450)
Old JIS key (JIS B1301-1959) Package
BS30-30E
BS50-45E
BS50-50E
BS65-40E
BS65-45E
BS65-50E
BS65-55E
BS65-60E
BS65-65E
BS75-60E
BS75-65E
BS75-70E
BS75-75E
BS85-70E
BS85-75E
BS85-80E
BS85-85E
BS95-80E
BS95-85E
BS95-90E
BS95-95E
BS110-85E
BS110-95E
BS110-100E
BS110-105E
BS110-110E
BS135-___E (※『_』:90~135)
BS160-___E (※『_』:100~160)
BS200-___E (※『_』:100~200)
BS220-___E (※『_』:150~220)
BS250-___E (※『_』:175~250)
BS270-___E (※『_』:200~270)
BS300-___E (※『_』:230~300)
BS335-___E (※『_』:250~335)
BS350-___E (※『_』:250~350)
BS425-___E (※『_』:325~425)
BS450-___E (※『_』:350~450)
Back to top

BS-HS Series

BS300HS - 300 J

Model No.


Keyways: indicates a normal grade keyway by new JIS standards. Add an 'E' to specify the old JIS standard grade 2 keyway.
Shaft Bore Diameter :φ300
  • Always provide the shaft bore diameter, keyway dimensions, and shaft and bore tolerances.
  • The tolerance for items with pre-machined standard stock shaft bores is H7.
  • This is a made to order item.
New JIS standard key (JIS B1301-1996) Package
BS160HS-___J (※『_』:100~160)
BS200HS-___J (※『_』:100~200)
BS220HS-___J (※『_』:150~220)
BS250HS-___J (※『_』:175~250)
BS270HS-___J (※『_』:200~270)
BS300HS-___J (※『_』:230~300)
BS350HS-___J (※『_』:250~350)
BS425HS-___J (※『_』:325~425)
BS450HS-___J (※『_』:350~450)
Old JIS key (JIS B1301-1959) Package
BS160HS-___E (※『_』:100~160)
BS200HS-___E (※『_』:100~200)
BS220HS-___E (※『_』:150~220)
BS250HS-___E (※『_』:175~250)
BS270HS-___E (※『_』:200~270)
BS300HS-___E (※『_』:230~300)
BS350HS-___E (※『_』:250~350)
BS425HS-___E (※『_』:325~425)
BS450HS-___E (※『_』:350~450)
Back to top

BS Torque Arm

BS-HS Torque Arm

Safety cover

BS Series   Maintenance kit