・Chain replacement frequency can be reduced by improving wear life.
(General-use, Heavy Duty Conveyor Chain)

・Low running resistance contributes to environmental load reduiction such as energy reduction.
(Bearing roller conveyor chain )

・Improved kW ratings enables compact design.

・Long life and compact design reduce waste.

・This product is designed to be environmentally friendly by using baked electrostatic powder instead of a thinner-based paint, and environmentally friendly packing material instead of lumber.

・This product is designed to be environmentally friendly by using baked electrostatic powder instead of a thinner-based paint, and environmentally friendly packing material instead of lumber.

・The small size EWJ Series uses single stage reduction. It is designed to be environmentally friendly by using baked electrostatic powder instead of a thinner-based paint.

・Environmentally-friendly ：Environmental considerations: Does not emit noise or mist as with air or hydraulic systems. All models meet the RoHS directive.

・Lower running cost ：Reduced running cost: Consumes electrical power only when in use. No compressors or other constantly operating equipment.

・Long life means less time and trouble for maintenance, and less replacement costs.

・Higher kilowatt ratings mean more compact equipment and fewer costs.

・General use series are economical. Heavy duty series can reduce maintenance time, labor, and replacement costs by improving wear life.
(General-use, Heavy Duty Conveyor Chain)

・Achieves size reduction, energy saving, and space saving of chain.
(Bearing roller conveyor chain )

・Long life means less time and trouble for maintenance, and less replacement costs.

・Improved kW ratings enables compact design.

・The small, lightweight design cuts material usage by 30%. Above all, this unit has low operating noise and is available with various options.

・The high loading capacity allows for compact and economical equipment design.

・The high loading capacity allows for compact and economical equipment design.

・Entirely self-contained and ready to run. Simply connect to a three-phase power supply. This unit does not require a limit switch for adjusting the stroke.

・This model can be driven with a DC power supply. It has the smallest and most compact design.

・An optional AC power supply is also available.

・This jack is suitable for low speeds and low frequency. This model has a simple and compact construction which makes it economical.

・It can be mounted on existing equipment for retrofit without making intensive mechanical modifications.

・Low friction resistance reduces required power.
(Bearing roller conveyor chain )

・Synchronous belt transmission is highly efficient with very little energy loss during operation.

・The optimized gear teeth with low gear-mesh loss and the use of exclusively formulated lubrication improves efficiency and has less energy consumption.

・The high efficiency operation of the uniquely designed gear teeth on the double enveloping worm gear achieves less energy consumption.

・All models use a high efficiency ball screw that can drive large thrusts with small capacity ratings.

・The motor operates only when the screw shaft strokes. Unlike air driven models, these models do not require constant operation of an air compressor.

・Lightweight and low moment of inertia uses less energy than units made of steel.

・Improvement of allowable load increases conveying capacity.
(Bearing roller conveyor chain )

・Synchronous belt transmission is highly efficient with very little energy loss during operation.

・All models use a high efficiency ball screw that can drive large thrusts with small capacity ratings.

・The ball screw is very efficient which allows for large thrust with a small drive source.

・High accuracy transmission is achieved by greatly reducing load stretch and drive elongation of belt, and by adopting integrated friction type locking belt sprocket (Lock Belt Sprocket).

・This gear reducer for servomotors uses a standard gear head (available in three gear types: helical gear, hypoid gear, and worm gear).

・By combining a precision ball screw and servomotor, the system delivers excellent stopping accuracy.

・No backlash ensures accurate torque transmission. Does not compromise the high accuracy of the servomotor.

・Transmits all power by friction for no backlash.

・Size-down design can be achieved by improving allowable load.
(Bearing roller conveyor chain )

・The use of a ball screw results in good efficiency which allows for a smaller motor capacity than trapezoidal screw types.

・This improves the safety of equipment with the self-locking properties only available in a worm gear.

・This improves the safety of equipment with the self-locking properties only available in a worm gear.

・LPTB, LPGB Type ：These types have a built-in mechanical wet-type slip clutch that serves as the overload protection devices. (Mechanical )

・LPTC, LPGC Type ：These types have a built-in electrical thrust detection mechanism that serves as the overload protection device. (Electric )

・The trapezoidal screw has theoretical self-locking properties, which makes it capable of holding loads as long as there is no vibration or shock.

・This allows direct protection of load-bearing points. It responds immediately by relieving overloads when an overload occurs.

・This allows preventive maintenance of equipment with minute loading fluctuations, and protection and control of machine tools.

・This meets user requirements by combining (integrating) the best gear reducers.