Drawing Library Large size conveyor chain
- General-purpose・Heavy duty
- Environment resistant
- Bearing roller
conveyor chain - Cement Conveyance
- Steel Facilities
- Biomass
- Waste Disposal Facilities
- Food Industry
- Water Treatment Facilities
- Automotive Industry
- Special
- Application devices
Accessories
Bearing Bush Chains
Model No. RF□□□□□R-NB～
Conveyor chain for high precision positioning.
- ・Needle bearings between pins and bushes minimize wear elongation as much as possible.
- ・Perfect for positioning and tact conveyance.
- ・Operating Ambient Temperature ：-20℃～60℃
Size
RF03tons～RF36tons
Contact us for imperial pitches.
Attachment Types
A1, A2, A3, K1, K2, K3
Roller type
R-roller
Double Plus Conveyor Chain
Model No. RF□□□□□VR～
Chain for conveyance and accumulation.
- ・During transportation, frictional force between a large and a small diameter roller causes both to rotate identically, and a ratio of roller diameter causes a speed of conveyed oject to be 2.3 times a chain speed.
- ・As there is a braking force acting on a large diameter roller, slip occurs between large and small diameter rollers, allowing for free flow conveyance.
- ・Energy savings, lower costs ：
Small coefficient of friction means low required horsepower, reducing a chain size required and costs. - ・Longevity ：
Chain speed is 1/2.3, and a chain can handle a large roller allowable load, giving a chain over twice life of Top Roller Chain. - ・Stable running ：
Height from rail to conveyed goods is low, allowing for stable running.
Size
RF03tons～RF17tons
Attachment Types
None
Roller type
VR-roller
※Special sprocket is required.
Outboard Roller Chains
Model No. RF□□□□□S-□□-□LSR□□～
This chain features an outboard roller on a S roller of a base conveyor chain.
- ・Sprocket engages center S rollers, while outboard rollers handle running to provide for smooth operation.
- ・Base conveyor chain is available in any series.
- ・Application examples 1：
For special attachments on plates. - ・Application examples 2：
For when supporting loads on a center S rollers is difficult. - ・Application examples 3：
For when installing a guide on a chain's return side is difficult. - ・Application examples 4：
For giving double plus and accumulation capabilities to R roller outboard rollers.
Chain Series
Manufactured with any series.
Size
RF03tons～RF36tons
RF430S～RF6205S
Attachment Types
Special attachments also can be manufactured.
Roller type
S-roller
Top Roller Chains
Model No. RF□□□□□S-□□-□LTR□～
Top rollers are attached to a base conveyor chain between pitches, allowing for direct support of conveyed items.
- ・Top rollers available in engineering plastic and bearing roller specs as well.
- ※Cannot use standard sprockets.
Contact a Tsubaki representative regarding special sprockets for this chain. - ・Application examples 1：
Chain can be run continuously while conveyed items on top of a conveyor can be accumulated temporarily with a stopper. - ・Application examples 2：
Conveying and stopping can be performed simultaneously on top of the same chain.
Chain Series
Manufactured with any series.
Size
RF03tons～RF17tons
RF6205
Attachment Types
None
Roller type
S-roller ,R-roller , F-roller
