Drawing Library Mechanical protectors
Shock Guard TGB Series
Model No. TGB～
Wide range of products and versatile types with extensive applications.
- ・A type that can be used for many applications with a wide variety of sizes, from compact, medium to large.
- ・The set torque can be selected by color-coded springs even in the same size.
- ・With sprocket and coupling type are also available
Set torque range
0.3～7150 N・m
Repeat working torque precision
±10%
Backlash
Low
Shock Guard TGE Series
Model No. TGE～
A type that can set a wide range of torque with the same size
- ・Both type-1 that can be installed to small diameter sprockets and wide belt sprockets, and type-3 that A type sprockets and belt sprockets can be directly mounted are applicable.
- ・Even with the same size, the set torque can be selected depending on the number of springs.
Set torque range
1.0～700 N・m
Repeat working torque precision
±5%
Backlash
Low
Shock Guard TGX Series
Model No. TGX～
High precision type thanks to its original ball and wedge construction.
- ・Superior rigidity in normal operation without backlash.
- ・The lost motion during trip is very small.
- ・The set torque can be selected by color-coded springs even in the same size.
- ・Coupling type and power lock type are also available.
Set torque range
1.5～784 N・m
Repeat working torque precision
±5%
Backlash
NO
Shock Guard TGF Series
Model No. TGF～
Excellent reset position precision.
- ・Ideal for direct mounting of an index table thanks to the excellent mounting surface accuracy of the output flange.
- ・Even with the same size, the set torque can be selected depending on the number of springs.
- ・Combination with Echt-Flex Coupling is available.
Set torque range
6.0～4900 N・m
Repeat working torque precision
±5%
Backlash
Minimal
Shock Guard TGM Series
Model No. TGM～
Sealed type with excellent environmental resistance
- ・It is a sealed type with pre-lubricated grease, so it will not be affected by torque accuracy due to dust, oil or water intrusion.
- ・The cam follower and pocket's engagement is a 2 points contact pressed against each other, meaning there is no backlash.
- ・With sprocket and coupling type are also available
Set torque range
0.6～1060 N・m
Repeat working torque precision
±5%
Backlash
NO
Shock Guard TGK Series
Model No. TGK～
Multi-functional type with air clutch function
- ・Adjusting the regulator air pressure allows you to operate the torque remotely while running.
- ・Can also be used as an on-off clutch with remote operation.
- ・Combination with Echt-Flex Coupling is available.
Set torque range
15～392 N・m
Repeat working torque precision
±5%
Backlash
Minimal
Set torque range
2.4～451 N・m
Repeat working torque precision
±10%
Backlash
Low
Load
147～3430 N
Trip load
±15%
Backlash
NO
