Selection Guide Power Cylinder [Selection from shape, motor type, and required features ]
Click here for ability map >>
Selection Guide Power Cylinder [Selection from ability map ]
・Click an area of each series to see the features of each series.
Click an area of each series to see the shape, motor type, and required features. >>
 |
|
| Rated Thrust | 58.8kN ～ 480kN {6 ～ 50tf} |
| Stroke | 500 ～ 2000mm |
| Motor | Induction motor |
| Screw Type | Special ball screws |
| Overload protection | Wet-type slip clutch Thrust detection limit switch |
|
A power cylinder with more than 6 tons of thrust that's smaller, lighter weight, and has a higher cost performance while maintaining the same performance of the previous model (T series). It can replace hydraulic cylinders on press machines, casting machines, and table lifters, as well as find use in conventional steel and environmental equipment.
|
|
 |
|
| Rated Thrust | 58.8 ～ 313kN {6 ～ 32tf} |
| Stroke | 500 ～ 2000mm |
| Motor | - |
| Screw Type | Special ball screws |
| Overload protection | Thrust detection limit switch |
|
Multiple cylinders can be driven synchronized to a single motor. UA type: compact and economical
|
|
 |
|
| Rated Thrust | 2.45 ～ 39.2kN {250 ～ 4000kgf} |
| Stroke | 200 ～ 1500mm |
| Motor | Induction motor |
| Screw Type | Ball screw |
| Overload protection | Wet-type slip clutch Thrust detection limit switch |
|
This power cylinder can be driven by AC power for large thrust applications. It can be used in a wide range of applications, such as steel, injection molding, LCD and semiconductor manufacturing equipment, etc. It can also be used outdoors (IP 55).
|
|
 |
|
| Rated Thrust | 2.45 ～ 39.2kN {250 ～ 4000kgf} |
| Stroke | 200 ～ 1500mm |
| Motor | - |
| Screw Type | Ball screw |
| Overload protection | Thrust detection limit switch |
|
Multiple cylinders can be driven synchronized to a single motor. TB type: compact and economical
|
|
 |
|
| Rated Thrust | 49kN ～ 490kN {5 ～ 50tf} |
| Stroke | 200 ～ 2000mm |
| Motor | Induction motor |
| Screw Type | Ball screw |
| Overload protection | - |
|
The Worm Series Power Cylinder is the perfect power cylinder for replacing hydraulic cylinders. Worm Series LPWB provides large thrust by using a high precision worm gear and a highly efficient ball screw manufactured with technology based on nearly a century of manufacturing tradition.
|
|
 |
|
| Rated Thrust | 700N ～ 3kN {70 ～ 300kgf} |
| Stroke | 100 ～ 1200mm |
| Motor | Induction motor |
| Screw Type | Ball screw Trapezoidal screw |
| Overload protection | Wet-type slip clutch Thrust detection limit switch |
|
This power cylinder can be driven by AC power for medium thrust applications. This unit can be used in a wide range of general industrial applications, such as steel, food, and vertical parking carousels.
|
|
 |
|
| Rated Thrust | 100N ～ 6kN {10 ～ 600kgf} |
| Stroke | 50 ～ 600mm |
| Motor | DC motor |
| Screw Type | Trapezoidal Screw |
| Overload protection | Wet-type slip clutch Thrust detection limit switch |
|
This power cylinder can be driven by DC power for small thrust applications. This unit is ideal for outdoor applications, such as farming machines and vertical parking carousels.
|
|
 |
|
| Rated Thrust | 150N ～ 15kN {15 ～ 1500kgf} |
| Stroke | 100 ～ 1000mm |
| Motor | Servo Motor |
| Screw Type | Ball screw |
| Overload protection | - |
|
|
 |
|
| Rated Thrust | 250N ～ 1kN {25.5 ～ 103kgf} |
| Stroke | 100 ～ 600mm |
| Motor | Induction motor |
| Screw Type | Ball screw |
| Overload protection | CDS |
|
CDS Detects overload current and stops the motor.
|
|
 |
|
| Rated Thrust | 98N ～ 392N {10 ～ 40kgf} |
| Stroke | 100 ～ 300mm |
| Motor | Single-phase dielectric motor |
| Screw Type | Trapezoidal Screw |
| Overload protection | - |
|
This series is suitable for automating everyday low-power tasks. Let these units work for you in packing and conveying equipment.
|
|
