Technical Data  Reducers  Small-Size Gear Motor  Motor Specifications

Brake Characteristics

1.Motor Output ：0.1kW ～ 5.5kW

Gear Motors, Hypoid Motors, Croise Motors

Motor Output 3 Phase 0.1kW 0.2kW 0.4kW
※0.55kW		 0.75kW 1.5kW 2.2kW 3.7kW 5.5kW
Brake model number 3 Phase 200V SLB01 SLB02 SLB04 SLB07E SLB15 SLB22 VNB371K NB-31190 VNB55KE
3 Phase 400V SLB01 SLB02 SLB04V SLB07E 180V SLB15 180V SLB22 180V VNB371KV NB-31192 VNB55KE
DC module model number 3 Phase 200V DM200D DM200D PM180B
3 Phase 400V DM400D
Braking torque Static friction torque N・m 0.98 1.96 3.92 7.35 15 22 37 55
{kgf・m} 0.1 0.2 0.40 0.75 1.50 2.20 3.77 5.61
Dynamic friction torque N・m 0.78 1.57 3.14 5.88 12.0 17.6 29.6 44
{kgf・m} 0.08 0.16 0.32 0.60 1.20 1.79 3.02 4.48
Voltage 3 Phase 200V DC90V DC90V Instant 180V
Constant 50V
3 Phase 400V DC180V
Current
at20 ℃ A		 3 Phase 200V 0.178 0.178 0.232 0.273 0.289 0.289 0.261 0.253
3 Phase 400V 0.142 0.145 0.145 0.135
capacity at 20 ℃ W 16.0 16.0 20.9 24.6/25.5 26.0/26.1 26.0/26.1 26.1/26.1 12.6/40.7
Initial gap mm 0.15 ～ 0.20 0.15 ～ 0.20 0.15 ～ 0.20 0.15 ～ 0.20 0.15 ～ 0.20 0.15 ～ 0.20 0.3 0.35
Limit gap mm 0.5 0.5 0.5 0.5 0.5 0.5 1.2 1.2
Moment of Inertia kg・m2 0.02×10-3 0.04×10-3 0.04×10-3 0.11×10-3 0.21×10-3 0.50×10-3 0.50×10-3 1.70×10-3
GD2 kgf ・m2 0.10×10-3 0.15×10-3 0.15×10-3 0.44×10-3 0.80×10-3 2.00×10-3 2.00×10-3 6.8×10-3
Total braking workload J
　　　　　　{kgf・m}		 1.31×108 1.85×108 1.85×108 3.66×108 3.73×108 3.73×108 13.5×108 24.7×108
1.34×107 1.89×107 1.89×107 3.73×107 3.81×107 3.81×107 13.8×107 25.2×107
Allowable start-up frequency times 10 times/min.
Braking delay time
S(Reference )		 AC internal wiring 0.18 ～ 0.25 0.15 ～ 0.21 0.14 ～ 0.17 0.20 ～ 0.24 0.30 ～ 0.45 0.30 ～ 0.45 0.50 ～ 0.70
(0.40 ～ 0.60)		 -
AC external wiring 0.11 ～ 0.18 0.09 ～ 0.12 0.06 ～ 0.09 0.10 ～ 0.13 0.10 ～ 0.13 0.10 ～ 0.13 0.20 ～ 0.40 -
AC external operation 0.11 ～ 0.18 0.09 ～ 0.12 0.06 ～ 0.09 0.10 ～ 0.13 0.10 ～ 0.13 0.10 ～ 0.13 0.20 ～ 0.40 0.03 ～ 0.05
DC external wiring 0.05 ～ 0.07 0.04 ～ 0.06 0.03 ～ 0.05 0.04 ～ 0.06 0.01 ～ 0.06 0.01 ～ 0.06 -
(0.02 ～ 0.04)		 -
  • Note 1)The rated torque values shown above are static and dynamic friction torque values after break-in.
  • Note 2)The braking delay time is included as a reference and may differ depending on the braking conditions, operating conditions, and individual differences. To shorten the braking delay time (for lifting equipment, etc.), using DC external wiring is recommended.
  • Note 3)The values for current and capacity are the values in the case of 200 V/400 V.
  • Note 4)※ indicates for Croise motor only.
  • Note 5)Values shown in the table above may differ for destination markets outside of Japan. Be sure to check prior to placing order.

2.Motor Output ：40W ～ 90W

Hypoid Motor Mini Series

Motor Output 3 Phase 40W 60W 90W
Single Phase
Brake model number 3 Phase BXW-04-10M-05-90V BXW-04-10M-10-90V
Single Phase
DC module model number 3 Phase DM200D
Single Phase DM100A
Braking torque Static friction torque
N・m {kgf・m}		 0.6 {6.1} 1.0 {10.2}
Dynamic friction torque
N・m {kgf・m}		 0.48 {4.8} 0.8 {8.1}
Operating voltage (V) 3 Phase DC90V
Single Phase
Current (A) 3 Phase 0.076 0.111
Single Phase
capacity (W) 6.8 10
Gap amount
(mm)		 Initial value 0.05～0.25
Max (3 Phase ) 0.4
Max (Single Phase ) 0.3
Total braking workload
J {kgf・m}		 3 Phase 16.5×106 {16.8×105} 13.4×106 {13.7×105}
Single Phase 8.0×106 {8.16×105} 7.1×106 {7.2×105}
Allowable start-up frequency times 10 times/min
Braking delay time
S(Reference )		 AC internal wiring 0.08 0.08
AC external wiring 0.04 0.04
AC external operation 0.04 0.04
DC external wiring 0.01 0.01