Technical Data High-speed lifters Zip Master Wire connection for motor
Three-phase Motor Wiring and Lifting Direction
Three-phase Motor Wiring (for inverter only)
3.7kW
Set the base frequency at 60 Hz.
5.5kW
Set the base frequency at 60 Hz.
(M)：Motor (B)：Brake MC：Magnetic contactor MCa ：Auxiliary relay OCR：Overcurrent relay
DM200D、PM180B：DC rectifier --N--：Protection element (Varistor )
| Product name | Company name | Model No. | ||
|---|---|---|---|---|
| Surge Absorber | Panasonic | ERZV14D471 | ||
| Ceramic Varistor | Nippon Chemi-Con | TND14V-471KB00AAA0 | ||
- Note 1 The brake voltage is 90 VDC. (When inputting 200 VAC to DM200D or PM180B )
- Note 2 When using a 3.7 kW motor, the brake power supply module can be damaged depending on the wiring length, wiring method, relay type, or other factors. Connect a varistor between the separate DC switching terminals.
- Note 3 For *1 in the diagram, use an auxiliary relay (MCa) with a contact capacity of 200 VAC / 7 A or more (resistive load).
When using an MC auxiliary contact or auxiliary relay for *2 in the diagram, use a device with a contact capacity of 200 VAC / 10 A or more (resistive load). - Note 4 Connecting closer to the brake power supply module (blue lead wire) will be most effective. The specific models of the varistors are as follows. Select a varistor voltage of 470 V for DM200D.
