Technical Data Drive chain Handling Roller Chains
6. Chain Test Run
After installing the chain, carry out a test run and check the following items before you actually start running the chain.
6.1 Pre-test run
- 1. Connecting link plates, clips, and cotter pins are installed correctly.
- 2. Chain slack has been properly adjusted.
- 3. Adequate lubrication is available.
- 4. The chain is not touching the chain case or other objects.
- 5. The roller chain path is clean and free from obstructions.
6.2 Test run
- 1. There should be no strange noises. The chain is not touching the chain case or other objects.
- 2. Look for excessive chain vibration.
- 3. Make sure the chain does not run up on the sprockets.
- 4. Ensure that the chain is not jammed into the sprockets.
- 5. The chain should bend smoothly.
Check the inspection checklist if there are any problems, and ensure roller chain and sprocket are correctly installed.
