Technical Data Reducers Worm Gear Reducers Technical Data
Moment of Inertia on Input Shaft (Single Reduction Gear Reducers ：1/10 ～ 1/60)
Solid Output Shaft (S Type )
| Nominal reduction ratio | Size | |||||||
|---|---|---|---|---|---|---|---|---|
| TD125S | TD150S | TD175S | TD200S | TD225S | TD250S | TD280S | TD315S | |
| 10 | 0.0049 {0.0197} |
0.0094 {0.0377} |
0.0171 {0.0683} |
0.0322 {0.1287} |
0.0528 {0.2113} |
0.0945 {0.3780} |
0.1669 {0.6676} |
0.3173 {1.2692} |
| 20 | 0.0044 {0.0175} |
0.0081 {0.0323} |
0.0138 {0.0553} |
0.0267 {0.1070} |
0.0448 {0.1792} |
0.0805 {0.3220} |
0.1413 {0.5651} |
0.2738 {1.0952} |
| 30 | 0.0043 {0.0172} |
0.0080 {0.0322} |
0.0133 {0.0534} |
0.0258 {0.1033} |
0.0417 {0.1667} |
0.0782 {0.3129} |
0.1353 {0.5413} |
0.2673 {1.0694} |
| 40 | 0.0043 {0.0171} |
0.0078 {0.0312} |
0.0132 {0.0530} |
0.0256 {0.1025} |
0.4320 {0.1728} |
0.0777 {0.3107} |
0.1364 {0.5457} |
0.2657 {1.0626} |
| 50 | 0.0043 {0.0170} |
0.0076 {0.0304} |
0.0135 {0.0540} |
0.0255 {0.1019} |
0.0423 {0.1693} |
0.0773 {0.3093} |
0.1337 {0.5348} |
0.2645 {1.0582} |
| 60 | 0.0042 {0.0170} |
0.0079 {0.0318} |
0.0131 {0.0525} |
0.0254 {0.1016} |
0.0423 {0.1692} |
0.0771 {0.3085} |
0.1332 {0.5328} |
0.2639 {1.0556} |
Hollow Output Shaft (H Type )
| Nominal reduction ratio | Size | |||||||
|---|---|---|---|---|---|---|---|---|
| TD125H | TD150H | TD175H | TD200H | TD225H | TD250H | TD280H | TD315H | |
| 10 | 0.0052 {0.0208} |
0.0098 {0.0391} |
0.0177 {0.0706} |
0.0332 {0.1327} |
0.0534 {0.2136} |
0.0953 {0.3812} |
0.1723 {0.6893} |
0.3251 {1.3003} |
| 20 | 0.0045 {0.0178} |
0.0082 {0.0327} |
0.0140 {0.0559} |
0.0270 {0.1081} |
0.0450 {0.1798} |
0.0807 {0.3230} |
0.1427 {0.5708} |
0.2758 {1.1034} |
| 30 | 0.0043 {0.0173} |
0.0081 {0.0323} |
0.0134 {0.0536} |
0.0259 {0.1038} |
0.0417 {0.1670} |
0.0783 {0.3133} |
0.1360 {0.5439} |
0.2682 {1.0730} |
| 40 | 0.0043 {0.0172} |
0.0078 {0.0313} |
0.0133 {0.0531} |
0.0257 {0.1028} |
0.0433 {0.1730} |
0.0777 {0.3110} |
0.1368 {0.5471} |
0.2662 {1.0648} |
| 50 | 0.0043 {0.0171} |
0.0076 {0.0305} |
0.0135 {0.0541} |
0.0255 {0.1021} |
0.0424 {0.1694} |
0.0774 {0.3095} |
0.1339 {0.5358} |
0.2649 {1.0596} |
| 60 | 0.0043 {0.0170} |
0.0080 {0.0318} |
0.0131 {0.0526} |
0.0254 {0.1017} |
0.0423 {0.1692} |
0.0771 {0.3086} |
0.1334 {0.5335} |
0.2641 {1.0565} |
