Technical Data Reducers Small-Size Gear Motor Handling
This section describes general use of gear motors, hypoid motors, and croise motors.
For more information, see the instruction manual provided with the product.
Storage
If you will not be using a gear motor for a while, store it under the following conditions.
1. Storage place
Store indoors in a clean, dry place.
Do not store outdoors, in humid or dusty places, or in places subject to extreme temperature changes and corrosive gases.
2. Storage position
Products are shipped and packed in the direction they will be mounted. Store it as delivered in the upright position.
If products are made for special installation, storing them in the wrong storage position may result in bearing section grease mixing with lubricating oil and spilling out.
3. Storage period
- (1)Do not store products for more than six months.
- (2)If products are to be stored for more than six months, they will require special rust-proofing specifications. Please contact Tsubaki.
4. Usage following storage
- (1)Non-metallic portions like oil seals, oil gauges, and oil plugs wear easily from environmental conditions such as extreme humidities and ultraviolet rays. Make sure to inspect these parts before operation and replace them if damaged.
- (2)When starting the motor, make sure there is no unusual noise, vibration, or heat generation. If there is, immediately contact the dealer.
