Technical Data High-speed lifters LIFT MASTER Position detecting sensor SPEC.
Position detecting sensor SPEC.
| Model | EE-SX972-C1(OMRON) |
|---|---|
| Supply voltage | DC5～24V±10% Ripple (p-p): 10% max |
| Control output | NPN open collector type (Load current: 50 mA or less ) |
| Output configuration | OUT1：Light-ON OUT2：Dark-ON |
| Electric circuit |
[Click to enlarge ] |
PNP open collector type is also available as a special output specification, so please consult us.
When operating the Lift Master in conjunction (motor synchronization)
Turn on all the power at the same time for starting and stop with the position detection sensors of each Lift Master.
Avoid controlling all units with one position detection sensor as this will result in cumulative stroke errors.
Addition of a position detection sensor is available as an option. For details, please refer to the "Additional position detection sensor (ball screw type and trapezoidal screw type)" section.
