Technical Data  Reducers  Worm Gear Reducers  Handling

This section contains general information regarding the handling of the EWJ/EWJM(R)/EW/EWM(R), and SWJ/SWJM(R)/SW/SWM(R), and TD Series.

For more information, see the instruction manual provided with the product.

3. Transporting

Be sure to use the eye-nut on the top surface of the housing (fastened with a hex bolt) when transporting the reducer. Never hook wires or slings to the input/output shafts. Doing so may cause unexpected load to the shaft/bearing and shorten the life of the reducer or cause a malfunction.

If the reducer comes with a motor, use the lifting hook on the motor as well to keep it balanced while lifting.