Technical Data Reducers DCBL Hypoid Motor Handling
This section describes the general handling of DCBL Hypoid Motor & Driver.
For more information, see the instruction manual provided with the product.
Inspection upon Receipt of Product
Check the following items upon receipt of your reducer.
Contact Tsubaki representative if any defects are found, or if you have any questions.
- (1) The outlet, reduction ratio, model number, voltage, and other items on the nameplate match the product you ordered.
- (2) No parts were damaged during transport.
- (3) No screws or nuts are loose.
1. Reading the nameplate
When you make an inquiry, provide us with the following information from the nameplate, TYPE (model number), RATIO (reduction ratio), MFG.NO. (serial number) and DRAWING.NO. (drawing number)
