Long-awaited range expansion
Zip Chain Actuators
Medium and Large size
"High thrust x Long stroke" to dramatically change vertical conveyance
Achieving "high functionality" and "space saving" in vertical conveyance
For those who are having trouble with insufficient thrust/stroke and improved takt time, Medium/Large size Zip Chain Actuator with significantly expanded thrust and stroke ranges are now available.
The range of thrust is expanded to "38.2kN" and stroke to "5000 mm". Furthermore, high-speed/high-frequency operation with a maximum speed of 1000 mm/s and a hourly load rate of 100%ED is possible.
ZIP CHAIN ACTUATOR is becoming more and more powerful, enabling higher performance of the equipment.
Space-saving even with an expanded range of application
The chain is stored compactly, and the height of the storage case is about 85% lower than the stroke.
Low floor
about
85
%
High-speed operation Max. 1000mm/s
Percentage duty cycle 100%ED
Expected life More than 1 million round trips
High controllability and multi-point stopping possible
Easy maintenance & Long life
Energy saving
Medium/Large Size Introduction
Medium size
Medium size is available in design stock model in two different sizes, by thrust and stroke, according to your application.
Medium size design stock model Model No. examples
ZUE | 063 | 1 | N | 20 | E | L | -TK |
| Series |
| Size 063 083 |
| | | | | | | | |
| | | | | | |
| | | | |
| | |
| Shaft Arrangement L:Left R:Right |
| TK:Special |
| Mounting direction E:Push up |
|||||||
| Stroke 12:1200mm 16:1600mm 20:2000mm 25:2500mm(※ZUE083 only ) |
|||||||
| Drive section N:With no drive section |
|||||||
| Shaft type 1:Single drive 2:Double drive |
Shaft type
Single drive | Double drive |
---|---|
Shaft Arrangement
L | R |
---|---|
Medium size Design stock model, major dimensions
Model | Allowable Thrust kN |
Stroke mm |
Approximate mass kg |
Dimensions mm |
|||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Single drive | Double drive | Single drive | Double drive | A | B | C | D | E | |||
ZUE | 063 | 6.7 | 10.1 | 1,200 | 90 | 100 | 1,120 | 203 | 305 | Φ55 | 125 |
1,600 | 100 | 110 | 1,380 | ||||||||
2,000 | 120 | 130 | 1,650 | ||||||||
083 | 10.7 | 16.1 | 1,200 | 140 | 170 | 1,210 | 236 | 350 | Single drive :Φ55 Double drive :Φ65 |
162 |
|
1,600 | 160 | 190 | 1,480 | ||||||||
2,000 | 190 | 220 | 1,760 | ||||||||
2,500 | 220 | 250 | 2,100 |
The following series for Medium sizes will also be considered for design.
Please contact us.
- 1) Hanging series
- 2) Lateral pushing series
- 3) With motor reducer
- 4) Special stroke (100~3,000mm)
※This diagram shows the double drive series.
Single drive series does not have a synchronous gear.
Large size
Large size with maximum thrust of 38.2kN and maximum stroke of 5,000mm is also available.
Please contact us for details.
Large size Thrust ・Stroke
Model | Allowable Thrust kN |
Maximum stroke mm |
||
---|---|---|---|---|
Single drive | Double drive | |||
ZUE | 103 | 16.3 | 24.5 | 4,000 |
123 | 25.7 | 38.2 | 5,000 |
Application
Automobile frame lifting device
Contributes to the tact time of automobile production lines, which are raised and lowered at a frequency of more than one round trip per minute.
AGV/AMR mounting & robot lifting
Mounted on an AGV/AMR, the robot can be raised and lowered to increase its range of motion.
Sorting and conveying to multistage conveyor
Workpieces transported by conveyor are sorted into multiple stages by high-speed lifting, realizing a reduction in vertical transport time.
Pallet stacking device
Pallet stacking device, enabling simplification of the guide frame by supporting the center of lifting section
About request for selection
ZIP CHAIN ACTUATOR Medium and Large Size Inquiry Sheet is available.
Please fill in the conditions of usage and contact us via the web or through a sales representative.
- If you wish to request a selection, please register as a member of this website in advance.
Contact Information
Online Inquiries
For inquiries in English, visit the Inquiries page on our Tsubaki Group website.