Low-noise chain  Major Specifications

RS60-SNS-1


[Click to enlarge ]
PDF Outline Drawing

Contact us for details.

DXF drawings / 3D CAD data

To CADENAS WEB2CAD website.

The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co.
Please direct your inquiries regarding the CAD data service or PARTcommunity to:
 CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032

Catalogs ・Instruction Manuals

Major Specifications

Size&Package
&No. of strands
No. of strands Min. tensile strength
kN {kgf}
Max. allowable load
kN {kgf}
Estimated Mass
kg/m
No. of links
per unit
RS60-SNS-1 1 40.2{4100} 8.83{900} 1.53 160

Notes
 1.When using an offset link (OL), the maximum allowable tension is 65% of the above table.
 2.Connecting links (JL) are the same as those for RS Roller Chain.
 3.Stocked unit


Principal dimensions  mm

Pitch
P
Roller dia.
R
Inner link inner width
W
Plate Pin
T H h D L1 L2 L
19.05 12.6 12.70 2.4 18.1 15.6 5.96 12.85 14.75 28.2

Price・Delivery

Type Unit
Model No. RS60-SNS-1-RP-U
Standard Price Contact us for details.
Delivery Contact us for details.

Applicable connecting link

Type Connecting link Offset link
Model No. RS60-1-MCJLRS60-SNS-1-OL
Standard Price Contact us for details. Contact us for details.
Delivery Contact us for details. Contact us for details.

Transmission Capacity Table  kW

Small
sprocket
no. of teeth
Small sprocket RPM  r/min
10 25 50 100 150 200 300 400 500 600 700 800 900 1000 1100
Lubrication method AI Lubrication method AII Lubrication method B
9 0.18 0.41 0.76 1.41 2.03 2.63 3.79 3.41 2.44 1.85 1.47 1.20 1.01 0.86 0.75
10 0.20 0.45 0.85 1.58 2.28 2.59 4.25 3.99 2.85 2.17 1.72 1.41 1.18 1.01
11 0.22 0.50 0.94 1.75 2.53 3.27 4.71 4.60 3.29 2.50 1.99 1.63 1.36
12 0.24 0.55 1.03 1.93 2.77 3.59 5.18 5.24 3.79 2.85 2.26 1.85
13 0.26 0.60 1.13 2.10 3.03 3.92 5.65 5.91 4.23 3.22 2.55 2.09
14 0.29 0.65 1.22 2.28 3.28 4.25 6.12 6.61 4.73 3.60 2.85
15 0.31 0.70 1.31 2.45 3.53 4.57 6.59 7.33 5.24 3.99
16 0.33 0.75 1.41 2.63 3.79 4.90 7.06 8.07 5.78 4.39
17 0.35 0.81 1.50 2.81 4.04 5.24 7.54 8.84 6.33 4.81
18 0.38 0.86 1.60 2.98 4.30 5.57 8.02 9.63 6.89
19 0.40 0.91 1.70 3.16 4.56 5.90 8.51 10.4 7.47
20 0.42 0.96 1.79 3.34 4.82 6.24 8.99 11.3 8.07
21 0.44 1.01 1.89 3.53 5.08 6.58 9.48 12.1
22 0.47 1.06 1.99 3.71 5.34 6.92 9.96 12.9
23 0.49 1.12 2.08 3.89 5.60 7.26 10.5 13.5
24 0.51 1.17 2.18 4.07 5.87 7.60 10.9 14.2
25 0.54 1.22 2.28 4.26 6.13 7.94 11.4 14.8
26 0.56 1.28 2.38 4.44 6.40 8.29 11.9 15.5
28 0.61 1.38 2.58 4.81 6.93 8.98 12.9
30 0.65 1.49 2.78 5.18 7.46 9.67 13.9
32 0.70 1.60 2.98 5.56 8.00 10.4 14.9
35 0.77 1.76 3.28 6.12 8.82 11.4
40 0.89 2.03 3.79 7.07 10.2 13.2
45 1.01 2.31 4.30 8.03 11.6 15.0

Notes
 1.kW ratings when using a 1-pitch offset link (OL) are 80% of the above.

Lubrication method AI AII B
方法 Manual lubrication Drip lubrication Oil bath or slinger disc