Low-noise chain Major Specifications
RS50-SNS-1
※ | The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co. |
※ | Please direct your inquiries regarding the CAD data service or PARTcommunity to: CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032 |
Catalogs ・Instruction Manuals
Major Specifications
Size&Package &No. of strands |
No. of strands |
Min. tensile strength kN {kgf} |
Max. allowable load kN {kgf} |
Estimated Mass kg/m |
No. of links per unit |
---|---|---|---|---|---|
RS50-SNS-1 | 1 | 28.4{2900} | 6.37{650} | 1.04 | 192 |
Notes
1.When using an offset link (OL), the maximum allowable tension is 65% of the above table.
2.Connecting links (JL) are the same as those for RS Roller Chain.
3.Stocked unit
Principal dimensions mm
Pitch P |
Roller dia. R |
Inner link inner width W |
Plate | Pin | |||||
---|---|---|---|---|---|---|---|---|---|
T | H | h | D | L1 | L2 | L | |||
15.875 | 10.8 | 9.53 | 2.0 | 15.0 | 13.0 | 5.09 | 10.3 | 11.9 | 22.6 |
Price・Delivery
Type | Unit |
---|---|
Model No. | RS50-SNS-1-RP-U |
Standard Price | Contact us for details. |
Delivery | Contact us for details. |
Applicable connecting link
Type | Connecting link | Offset link |
---|---|---|
Model No. | RS50-1-MCJL | RS50-SNS-1-OL |
Standard Price | Contact us for details. | Contact us for details. |
Delivery | Contact us for details. | Contact us for details. |
Transmission Capacity Table kW
Small sprocket no. of teeth |
Small sprocket RPM r/min | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
10 | 25 | 50 | 100 | 200 | 300 | 400 | 500 | 700 | 900 | 1000 | 1200 | |
Lubrication method AI | Lubrication method AII | Lubrication method B | ||||||||||
9 | 0.10 | 0.23 | 0.43 | 0.80 | 1.49 | 2.15 | 2.78 | 2.11 | 1.27 | 0.87 | 0.74 | 0.57 |
10 | 0.11 | 0.26 | 0.48 | 0.90 | 1.67 | 2.41 | 3.12 | 2.47 | 1.49 | 1.02 | 0.87 | 0.66 |
11 | 0.12 | 0.28 | 0.53 | 0.99 | 1.85 | 2.67 | 3.46 | 2.85 | 1.72 | 1.18 | 1.01 | |
12 | 0.14 | 0.31 | 0.58 | 1.09 | 2.03 | 2.93 | 3.80 | 3.24 | 1.96 | 1.34 | 1.15 | |
13 | 0.15 | 0.34 | 0.64 | 1.19 | 2.22 | 3.19 | 4.14 | 3.66 | 2.21 | 1.51 | ||
14 | 0.16 | 0.37 | 0.69 | 1.29 | 2.40 | 3.46 | 4.48 | 4.09 | 2.47 | |||
15 | 0.17 | 0.40 | 0.74 | 1.39 | 2.59 | 3.73 | 4.83 | 4.53 | 2.74 | |||
16 | 0.19 | 0.43 | 0.80 | 1.49 | 2.78 | 4.00 | 5.18 | 4.99 | 3.01 | |||
17 | 0.20 | 0.46 | 0.85 | 1.59 | 2.96 | 4.27 | 5.53 | 5.47 | 3.30 | |||
18 | 0.21 | 0.49 | 0.91 | 1.69 | 3.15 | 4.54 | 5.88 | 5.96 | ||||
19 | 0.23 | 0.51 | 0.96 | 1.79 | 3.34 | 4.81 | 6.24 | 6.46 | ||||
20 | 0.24 | 0.54 | 1.01 | 1.89 | 3.53 | 5.09 | 6.59 | 6.98 | ||||
21 | 0.25 | 0.57 | 1.07 | 2.00 | 3.72 | 5.36 | 6.95 | 7.51 | ||||
22 | 0.26 | 0.60 | 1.12 | 2.10 | 3.91 | 5.64 | 7.31 | 8.05 | ||||
23 | 0.28 | 0.63 | 1.18 | 2.20 | 4.11 | 5.92 | 7.66 | 8.60 | ||||
24 | 0.29 | 0.66 | 1.24 | 2.30 | 4.30 | 6.19 | 8.03 | 9.17 | ||||
25 | 0.30 | 0.69 | 1.29 | 2.41 | 4.49 | 6.47 | 8.39 | 9.75 | ||||
26 | 0.32 | 0.72 | 1.35 | 2.51 | 4.69 | 6.75 | 8.75 | |||||
28 | 0.34 | 0.78 | 1.46 | 2.72 | 5.08 | 7.32 | 9.48 | |||||
30 | 0.37 | 0.84 | 1.57 | 2.93 | 5.47 | 7.88 | 10.2 | |||||
32 | 0.40 | 0.90 | 1.69 | 3.14 | 5.87 | 8.45 | ||||||
35 | 0.44 | 0.99 | 1.86 | 3.46 | 6.46 | 9.31 | ||||||
40 | 0.50 | 1.15 | 2.14 | 4.00 | 7.47 | 10.8 | ||||||
45 | 0.57 | 1.30 | 2.44 | 4.54 | 8.48 |
Notes
1.kW ratings when using a 1-pitch offset link (OL) are 80% of the above.
Lubrication method | AI | AII | B | |
---|---|---|---|---|
Method | Manual lubrication | Drip lubrication | Oil bath or slinger disc |
Contact Information
Online Inquiries
For inquiries in English, visit the Inquiries page on our Tsubaki Group website.