※The contact area of the hub with the spider is coated with special grease for plastic. Please use as is without wiping off the grease.
Wiping off grease may cause premature wear of the spider.
※Clamp bolts are lubricated with grease. Please use as is without wiping off the grease.
If grease is wiped off, the shaft coupling torque may be lower than the standard value.
Taper-Lock fastening
※The contact area of the hub with the spider is coated with special grease for plastic. Please use as is without wiping off the grease.
Wiping off grease may cause premature wear of the spider.
※Grease is applied to the contact area between the hub and the tapered surface of the pressure ring. Please use as is without wiping off the grease.
If grease is wiped off, the shaft coupling torque may be lower than the standard value.
※Pressure bolts are made with special surface treatment. Do not use anything other than the supplied pressure bolts.
If bolts other than those supplied are used, the shaft coupling torque may be lower than the standard value.
