PX Belt Shinayaka 530 type 　Major Specifications

Model No. examples

BG	200	P	2M	10	-530
｜ Synchronous belt	｜ Belt length mm	｜ P：PX	｜ Types (Pitch )	｜ Belt width mm	｜ SHINAYAKA 530 Type

Major Specifications

Belt width	Unit mass g/(mm width x m length)	Initial tension 　N {kgf}
		Recommended value	Maximum value
6	1.4	9.4 {1.0}	12 {1.2}

Material	Rubber	Chloroprene rubber
	Tooth fabric	Nylon woven fabric (Low wear debris type)
	Cord	Fiberglass
Ambient conditions	Available for the following belt sprocket types	PX Belt Sprocket P2M
	Oil and water resistant	No (cannot be used)
	Operating Ambient Temperature	-15℃～80℃
	RoHS compliant	Compliant
	Electroconductive	None

Belt length

※ Expand all Collapse all

Circumference 80　～　126

Circumference 132　～　160

Circumference 162　～　190

Circumference 196　～　230

Circumference 234　～　270

Circumference 274　～　318

Circumference 320　～　370

Circumference 378　～　434

Circumference 440　～　560

Circumference 576　～　710

Circumference 754　～　898

Circumference 900　～　1192

Circumference 1242　～　1820

Standard transmission capacity 　W　(Multiplied by the 1.58 coefficient of width)

Small belt sprocket rotation speed r/min	Upper row: Number of teeth of small belt sprocket Lower row: Pitch diameter 　mm
	14	15	16	18	20	22	24	25	26	28	30	32	34	36	40	42	44	48	50	60
	8.91	9.55	10.19	11.46	12.73	14.01	15.28	15.92	16.55	17.83	19.10	20.37	21.65	22.92	25.46	26.74	28.01	30.56	31.83	38.20
20	0.79	0.79	0.79	0.94	1.10	1.26	1.26	1.42	1.42	1.58	1.73	1.89	2.21	2.37	2.68	3.00	3.16	3.63	3.95	5.21
40	1.26	1.42	1.58	1.73	1.89	2.21	2.37	2.52	2.68	3.00	3.31	3.63	3.95	4.26	5.05	5.37	5.84	6.63	7.11	9.48
60	1.89	2.05	2.21	2.52	2.84	3.16	3.47	3.63	3.79	4.26	4.74	5.05	5.53	6.00	7.11	7.58	8.21	9.32	9.95	13.4
100	2.84	3.16	3.31	3.79	4.26	4.89	5.37	5.68	6.00	6.63	7.26	7.90	8.69	9.32	10.9	11.6	12.6	14.3	15.3	20.3
200	5.21	5.68	6.00	6.95	7.90	8.84	9.79	10.2	10.9	12.0	13.1	14.2	15.4	16.7	19.4	20.8	22.4	25.4	27.1	35.8
400	9.32	10.1	10.9	12.4	14.0	15.8	17.5	18.4	19.4	21.3	23.2	25.2	27.4	29.7	34.2	36.8	39.1	44.5	47.2	61.9
600	13.1	14.0	15.1	17.3	19.5	21.9	24.4	25.7	27.0	29.7	32.3	35.2	38.0	41.0	47.4	50.7	54.0	60.9	64.6	84.2
800	16.4	17.8	19.1	21.9	24.8	27.8	30.9	32.5	34.1	37.4	40.7	44.2	47.8	51.5	59.2	63.3	67.4	75.9	80.4	103
1000	19.7	21.3	22.9	26.2	29.7	33.3	36.9	38.8	40.7	44.7	48.6	52.7	57.0	61.3	70.3	75.0	79.7	89.7	94.8	121
1200	22.7	24.6	26.5	30.4	34.4	38.5	42.8	44.8	47.0	51.5	56.0	60.8	65.5	70.4	80.7	85.9	91.3	102	108	138
1400	25.7	27.8	30.0	34.4	38.8	43.4	48.1	50.7	52.1	58.1	63.2	68.4	73.7	79.3	90.5	96.3	102	114	120	154
1450	26.3	28.5	30.8	35.3	39.9	44.7	49.6	52.1	53.0	59.7	64.9	70.3	75.8	81.3	92.9	98.9	104	117	123	157
1500	27.1	29.3	31.6	36.3	41.0	45.9	50.8	53.5	54.6	61.3	66.6	72.2	77.7	83.4	95.2	101	107	120	126	161
1600	28.5	30.9	33.3	38.2	43.1	48.3	53.5	56.2	56.0	64.4	69.9	75.8	81.6	87.5	99.8	106	112	125	132	168
1750	30.4	33.1	35.7	40.9	46.2	51.8	57.5	60.3	58.9	69.2	75.0	81.0	87.2	93.5	106	113	120	133	141	178
1800	31.2	33.8	36.4	41.8	47.4	52.9	58.7	61.6	64.6	70.4	76.6	82.7	89.1	95.5	108	115	122	136	143	181
2000	33.8	36.6	39.5	45.3	51.3	57.5	63.6	66.8	69.9	76.3	82.9	89.5	96.3	103	117	124	131	146	154	194
2400	38.8	42.1	45.5	52.2	59.0	66.0	73.1	76.7	80.2	87.5	94.9	102	109	117	133	141	149	165	174	217
3000		49.7	53.8	61.7	69.9	78.2	86.4	90.6	94.8	103	111	120	128	137	155	164	173	191	200	248
3600		56.8	61.6	70.7	80.1	89.4	98.9	103	108	117	127	136	146	156	175	185	194	214	224	274
4000			66.5	76.4	86.5	96.6	106	111	116	126	136	147	157	167	187	197	208	228	238	290
5000			78.0	89.9	101	113	125	130	136	148	159	171	182	193	215	226	237	259	270	322
6000			88.6	102	115	128	142	148	154	167	180	192	204	217	240	252	263	285	296	348
8000				124	140	156	172	179	187	202	216	230	243	257	282	293	305	327	337	382
10000				143	162	181	198	207	215	231	247	262	276	289	314	326	337	356	365	398
12000					182	203	222	231	240	257	274	289	303	317	340	351	360	376	382	401
14000					200	222	243	252	263	280	297	312	327	339	361	370	377	388	392	406

・Avoid using in the gray highlighted range as the belt will have a shorter service life.

Standard Transmission Torque 　N・m　(Multiplied by the 1.58 coefficient of width)

Small belt sprocket rotation speed r/min	Upper row: Number of teeth of small belt sprocket Lower row: Pitch diameter 　mm
	14	15	16	18	20	22	24	25	26	28	30	32	34	36	40	42	44	48	50	60
	8.91	9.55	10.19	11.46	12.73	14.01	15.28	15.92	16.55	17.83	19.10	20.37	21.65	22.92	25.46	26.74	28.01	30.56	31.83	38.20
20	0.34	0.36	0.39	0.44	0.50	0.56	0.63	0.66	0.71	0.77	0.85	0.93	1.01	1.10	1.31	1.40	1.50	1.73	1.84	2.49
40	0.31	0.33	0.36	0.41	0.45	0.52	0.58	0.61	0.66	0.71	0.79	0.85	0.93	1.01	1.18	1.27	1.37	1.58	1.67	2.25
60	0.30	0.31	0.34	0.39	0.44	0.48	0.55	0.58	0.63	0.67	0.74	0.80	0.88	0.96	1.12	1.21	1.29	1.48	1.58	2.11
100	0.28	0.30	0.31	0.36	0.41	0.45	0.52	0.53	0.56	0.63	0.69	0.75	0.82	0.90	1.04	1.12	1.20	1.37	1.45	1.94
200	0.25	0.26	0.28	0.33	0.37	0.42	0.47	0.48	0.52	0.56	0.61	0.67	0.74	0.80	0.93	0.99	1.07	1.21	1.29	1.70
400	0.22	0.23	0.25	0.30	0.33	0.37	0.41	0.44	0.45	0.50	0.55	0.60	0.64	0.71	0.82	0.88	0.93	1.05	1.12	1.46
600	0.20	0.22	0.23	0.26	0.31	0.34	0.39	0.41	0.42	0.47	0.52	0.55	0.60	0.64	0.75	0.80	0.85	0.96	1.02	1.34
800	0.18	0.20	0.22	0.26	0.30	0.33	0.36	0.39	0.41	0.44	0.48	0.52	0.56	0.61	0.71	0.75	0.80	0.90	0.96	1.24
1000	0.18	0.20	0.22	0.25	0.28	0.31	0.34	0.36	0.39	0.42	0.45	0.50	0.53	0.58	0.66	0.71	0.75	0.85	0.90	1.16
1200	0.17	0.18	0.20	0.23	0.26	0.30	0.34	0.36	0.37	0.41	0.44	0.48	0.52	0.56	0.64	0.67	0.72	0.82	0.85	1.10
1400	0.17	0.18	0.20	0.23	0.26	0.30	0.33	0.34	0.36	0.39	0.42	0.47	0.50	0.53	0.61	0.66	0.69	0.77	0.82	1.04
1450	0.17	0.18	0.20	0.23	0.26	0.30	0.33	0.34	0.34	0.39	0.42	0.45	0.50	0.53	0.61	0.64	0.69	0.77	0.82	1.04
1500	0.17	0.18	0.20	0.23	0.26	0.28	0.33	0.34	0.34	0.39	0.42	0.45	0.48	0.53	0.60	0.64	0.67	0.75	0.80	1.02
1600	0.17	0.18	0.20	0.22	0.25	0.28	0.31	0.33	0.34	0.37	0.41	0.45	0.48	0.52	0.60	0.63	0.67	0.75	0.79	1.01
1750	0.17	0.17	0.18	0.22	0.25	0.28	0.31	0.33	0.33	0.37	0.41	0.44	0.47	0.50	0.58	0.61	0.64	0.72	0.77	0.97
1800	0.15	0.17	0.18	0.22	0.25	0.28	0.31	0.33	0.33	0.37	0.41	0.44	0.47	0.50	0.56	0.61	0.64	0.72	0.75	0.96
2000	0.15	0.17	0.18	0.22	0.25	0.26	0.30	0.31	0.33	0.36	0.39	0.42	0.45	0.48	0.55	0.60	0.63	0.69	0.74	0.93
2400	0.15	0.17	0.17	0.20	0.23	0.26	0.28	0.30	0.31	0.34	0.37	0.41	0.44	0.47	0.53	0.56	0.60	0.66	0.69	0.86
3000		0.15	0.17	0.18	0.22	0.25	0.26	0.28	0.30	0.33	0.36	0.37	0.41	0.44	0.48	0.52	0.55	0.61	0.63	0.79
3600		0.15	0.15	0.18	0.20	0.23	0.26	0.26	0.28	0.31	0.33	0.36	0.39	0.41	0.45	0.48	0.52	0.56	0.60	0.72
4000		0.14	0.15	0.18	0.20	0.23	0.25	0.26	0.28	0.30	0.33	0.34	0.37	0.39	0.44	0.47	0.48	0.55	0.56	0.69
5000			0.14	0.17	0.18	0.22	0.23	0.25	0.26	0.28	0.30	0.33	0.34	0.36	0.41	0.42	0.45	0.48	0.52	0.61
6000			0.14	0.15	0.18	0.20	0.22	0.23	0.25	0.26	0.28	0.30	0.33	0.34	0.37	0.39	0.42	0.45	0.47	0.55
8000				0.14	0.17	0.18	0.20	0.22	0.22	0.23	0.25	0.26	0.28	0.30	0.33	0.34	0.36	0.39	0.39	0.45
10000				0.14	0.15	0.17	0.18	0.20	0.20	0.22	0.23	0.25	0.26	0.28	0.30	0.31	0.31	0.34	0.34	0.37
12000					0.14	0.15	0.17	0.18	0.18	0.20	0.22	0.23	0.23	0.25	0.26	0.28	0.28	0.30	0.30	0.31
14000					0.14	0.15	0.15	0.17	0.17	0.18	0.20	0.22	0.22	0.23	0.25	0.25	0.25	0.26	0.28	0.28

・Avoid using in the gray highlighted range as the belt will have a shorter service life.

Available for the following belt sprocket types

Type		Material	Base Model No.	Tooth no. range
DF		Aluminum	P2M6DF-A	14T～27T
AF/A BF/B		Aluminum	P2M6BF-A P2M6B-A	28T～112T
Cylindrical		Aluminum	P2M-100L-A	10T～60T
Lock Belt Sprockets C Type		Aluminum	P2M6BF-A-C□□	28T～60T