Zip Chain Actuator Major Specifications

Characteristics

Allowable stroke mm　※1	Allowable Thrust 　N　※2 Upper row ：No Bellows Lower row ：With Bellows	Maximum speed mm/s ※3	Maximum Input Speed r/min	Allowable Torque on Input Shaft N･m	Allowable overhang load N	Amount of Zip Chain movement per input shaft rotation mm
2000	1200	500	125	116.6	2065	240
	900

※1.Use the unit within the allowable stroke range. Also, be sure to always attach a linear guide in the direction of travel.
※2.Values represent basic performance with an end fixture attached. Values are for when operated at a maximum 0.35 G (upper limit) acceleration. These values are applicable regardless of the type of installation (vertical, horizontal, hanging).
※3.Zip Chain speed at maximum input rotation speed.

Table of Dimensions

A mm	B mm	L　mm Upper row ：No Bellows 　Lower row ：With Bellows		Estimated Mass 　kg Upper row ：No Bellows Lower row ：With Bellows
		min	max
548	1258	250	2250	30
		465	2465	32

Package ・Operating Environment Standards

Drive section	Material	Cast iron
	Paint Color	Black, Munsell N2.0 equivalent
Housing section	Material	Steel (Partially plastic)
	Paint Color	Black, Munsell N2.0 equivalent
Chain	Material	Steel
	Lubrication	Shell Alvania EP Grease 2 (Showa Shell Sekiyu K.K.) *Pre-sealed
Operating Environment Standards	Operating temperature	0～60℃
	Relative Humidity	85% or less (no condensation)
	Operating environments	Typical rain-free indoor environment with the amount of dust kept at a general factory level.
	Mounting direction	ZCAs can be used in lifting, horizontal, and hanging installations, but always provide a linear guide in the direction of travel. A mounting base is required for hanging installations.

Model No.	Standard Price	Delivery
ZCA45-CAP	Contact us for details.	Contact us for details.