Power-Lock AS Series Electroless nickel-plated Major Specifications
Model No. ：PL200X260AS-KP
[Click to enlarge ]
PDF Outline Drawing
CAD data in DXF format
PL200X260AS-KP
（Click here for a list of all DXF files ）
3D CAD data
Standard Price
Contact us for details.
Delivery
Contact us for details.
| ※ | The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co. |
| ※ | Please direct your inquiries regarding the CAD data service or PARTcommunity to: CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032 |
Catalogs ・Instruction Manuals
Package
| Applicable shaft tolerance | Applicable hub hole tolerance | Applicable surface roughness | Centering function | Lubrication during assembly | Hub movement during assembly |
|---|---|---|---|---|---|
| h8 | H8 | Ra1.6 | NO | Not necessary | NO |
This Series requires a centering guide for the hub.
If the length of the guide portion for centering is at least half that of the shaft diameter (d/2), you can obtain practical centering accuracy.
Determine the tolerance of the guide portion based on the required precision.
Specifications
| Dimensions mm | Transmission Torque | Thrust load | Shaft-side contact pressure | Hub-side contact pressure | Tightening bolts | Mass kg |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | L | ℓ | Lt | Mt | Pax | P | P' | Pieces | Size | Tightening torque MA | ||||||
| N･m | {kgf･m} | kN | {kgf} | MPa | {kgf/mm2} | MPa | {kgf/mm2} | N･m | {kgf･m} | ||||||||
| 200 | 260 | 52 | 48 | 66 | 52700 | 5380 | 527 | 53800 | 146 | 14.9 | 113 | 11.5 | 21 | M14×45 | 225 | 23 | 8.26 |
Minimum Required Hub OD List [mm]
| Yield point stress of the material σ0.2 MPa {kgf/mm2} |
206 {21} | 225 {23} |
245 {25} |
274 {28} |
294 {30} |
343 {35} |
392 {40} |
441 {45} |
ボス 加工 深さ b (mm) |
|---|---|---|---|---|---|---|---|---|---|
| Material examples | FC350 SS400 SC410 S10C SUS304 | SC450 S15C SF440 |
FCD400 SS490 SC480 S20C SF490 |
S30C SF540 |
FCD450 S35C SF590 |
FCD500 S45C |
FCD600 S55C |
FCD700 |
|
| If the hub geometry factor is 0.6 | 366 | 355 | 346 | 335 | 329 | 318 | 310 | 304 | 68 |
| If the hub geometry factor is 0.8 | 416 | 398 | 383 | 366 | 357 | 341 | 329 | 320 | 134 |
Contact Information
Online Inquiries
For inquiries in English, visit the Inquiries page on our Tsubaki Group website.
