Power-Lock AS Series Electroless nickel-plated Major Specifications

Package

Applicable shaft tolerance	Applicable hub hole tolerance	Applicable surface roughness	Centering function	Lubrication during assembly	Hub movement during assembly
h8	H8	Ra1.6	NO	Not necessary	NO

This Series requires a centering guide for the hub.
If the length of the guide portion for centering is at least half that of the shaft diameter (d/2), you can obtain practical centering accuracy.
Determine the tolerance of the guide portion based on the required precision.

Specifications

Dimensions 　mm					Transmission Torque		Thrust load		Shaft-side contact pressure		Hub-side contact pressure		Tightening bolts				Mass kg
d	D	L	ℓ	Lt	Mt		Pax		P		P'		Pieces	Size	Tightening torque 　MA
					N･m	{kgf･m}	kN	{kgf}	MPa	{kgf/mm2}	MPa	{kgf/mm2}			N･m	{kgf･m}
170	225	44	40	58	34100	3480	402	41000	157	16	119	12.1	16	M14×40	225	23	5.49

Minimum Required Hub OD List [mm]

Yield point stress of the material σ0.2 MPa {kgf/mm2}	206 {21}	225 {23}	245 {25}	274 {28}	294 {30}	343 {35}	392 {40}	441 {45}	ボス 加工 深さ b (mm)
Material examples	FC350 SS400 SC410 S10C SUS304	SC450 S15C SF440	FCD400 SS490 SC480 S20C SF490	S30C SF540	FCD450 S35C SF590	FCD500 S45C	FCD600 S55C	FCD700
If the hub geometry factor is 0.6	323	312	304	294	288	278	271	265	60
If the hub geometry factor is 0.8	371	353	339	323	315	299	288	280	118

Power-Lock selection calculator