Power-Lock AS Series: Stainless steel Major Specifications
Model No. :PL150X200AS-SS
PDF Outline Drawing
CAD data in DXF format
Contact us for details.
(Click here for a list of all DXF files )
3D CAD data
Standard Price
Contact us for details.
Delivery
Contact us for details.
※ | The CAD data contained herein is made available to you via the CAD drawing library; PARTcommunity is provided by CADENAS WEB2CAD Co. |
※ | Please direct your inquiries regarding the CAD data service or PARTcommunity to: CADENAS WEB2CAD Co. TEL: +81 (3) 5961-5031 FAX: +81 (3) 5961-5032 |
Catalogs ・Instruction Manuals
Package
Applicable shaft tolerance | Applicable hub hole tolerance | Applicable surface roughness | Centering function | Lubrication during assembly | Hub movement during assembly |
---|---|---|---|---|---|
h8 | H8 | Ra1.6 | NO | Not necessary | NO |
This Series requires a centering guide for the hub.
If the length of the guide portion for centering is at least half that of the shaft diameter (d/2), you can obtain practical centering accuracy.
Determine the tolerance of the guide portion based on the required precision.
Specifications
Dimensions mm | Transmission Torque | Thrust load | Shaft-side contact pressure | Hub-side contact pressure | Tightening bolts | Mass kg |
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
d | D | L | ℓ | Lt | Mt | Pax | P | P' | Pieces | Size | Tightening torque MA | ||||||
N・m | {kgf・m} | kN | {kgf} | MPa | {kgf/mm2} | MPa | {kgf/mm2} | N・m | {kgf・m} | ||||||||
150 | 200 | 38 | 34 | 50 | 20900 | 2130 | 278 | 28400 | 152 | 15.5 | 114 | 11.6 | 18 | M12×35 | 118 | 12 | 3.82 |
Minimum Required Hub OD List [mm]
Yield point stress of the material σ0.2 MPa {kgf/mm2} |
176 {18} | 206 {21} | 225 {23} |
245 {25} |
274 {28} |
294 {30} |
343 {35} |
392 {40} |
441 {45} |
ボス 加工 深さ b (mm) |
---|---|---|---|---|---|---|---|---|---|---|
Material examples | FC300 SS330 SC360 SUS405 | FC350 SS400 SC410 S10C SUS304 | SC450 S15C SF440 |
FCD400 SS490 SC480 S20C SF490 |
S30C SF540 |
FCD450 S35C SF590 |
FCD500 S45C |
FCD600 S55C |
FCD700 |
|
If the hub geometry factor is 0.6 | 301 | 283 | 274 | 267 | 258 | 254 | 245 | 239 | 234 | 52 |
If the hub geometry factor is 0.8 | 354 | 322 | 307 | 296 | 283 | 276 | 263 | 254 | 247 | 102 |
Contact Information
Online Inquiries
For inquiries in English, visit the Inquiries page on our Tsubaki Group website.